Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Deutz-Fahr › AgroXtra › AgroXtra 4.47

Deutz-Fahr AgroXtra 4.47

Built: 1993–1995 · Series: AgroXtra

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the AgroXtra 4.47, Deutz-Fahr offers a model from the AgroXtra series. Production: 1993–1995. The engine delivers 82 hp (60.2 kW), has 4 cylinders, with a displacement of 4,086 cm³. Torque is 297 Nm. Rated speed is 2,300 rpm. The machine is 4,215 mm long, 1,870 mm wide and 2,640 mm high. The unladen weight is 3,780 kg. The wheelbase measures 2,440 mm. Ground clearance is 450 mm. Top speed is 30 km/h. The tank holds 130 litres. Transmission: 15V/5R or 18V/6R. The engine is air-cooled. Tyres: front 13.6 R 24 AS, rear 16.9 R 34 AS. The fuel is diesel. Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 540/1000 rpm. The AgroXtra series covers 6 models. Rated output within it ranges from 60 to 113 hp; the AgroXtra 4.47 sits in the middle of that range with 82 hp. Its immediate neighbours are the AgroXtra 4.17 below it with 75 hp and the AgroXtra 4.57 above it with 90 hp. Unladen weight within it ranges from 3,290 to 4,550 kg; here the AgroXtra 4.47 sits in the lower part of that range with 3,780 kg. 692 Deutz-Fahr models across 50 series are on record.

Deutz-Fahr AgroXtra – the SDF Group's entry class: AgroXtra 3.57 to 6.17, three- to six-cylinder diesels rated 44–83 kW, 3,290–4,550 kg

The AgroXtra line filled out Deutz-Fahr's entry-level segment below the large Agrotron models. Deutz-Fahr has belonged to the SDF Group, headquartered in Treviglio, Italy, since the merger of SAME and Deutz-Fahr. The type designation follows a series-dot-grade pattern, where the first digit marks the series (3, 4 or 6) and the digits after the dot the grade within that series – from the AgroXtra 3.57 with a three-cylinder engine to the AgroXtra 6.17 with a six-cylinder at the top of the range.

Read on 3 more paragraphs

The register lists 6 versions rated at 43.9 to 82.7 kW (60 to 113 hp) from three- to six-cylinder diesel engines of 3,064 to 6,128 cm³, torque of 195 to 387 Nm at 2,300 to 2,500 rpm, kerb weights of 3,290 to 4,550 kg, and a length of 3,680 to 4,530 mm, a width of 1,870 to 2,304 mm and a height of 2,460 to 2,735 mm.

The AgroXtra targeted medium-sized farms wanting a robust, technically simpler tractor below the fully equipped Agrotron class, putting it up against entry models from Fendt, John Deere and Case IH.

On a used example, check engine and injection condition, the clutch and mechanical or power-shift transmission, the hydraulic pump and lift, and cab seals and electrics; on the larger six-cylinder versions also boost pressure and the turbocharger. Spares run through Deutz-Fahr's SDF dealer network.

Sources: SpecCodex register, model data: Deutz-Fahr AgroXtra, Deutz-Fahr (SDF-Gruppe, Hersteller)

Technical data

Engine

Fueldieselcorrect
Power82 hp (60.2 kW)correct
Rated speed2,300 rpmcorrect
Torque297 Nmcorrect
Cylinders4correct
Displacement4,086 cm³correct
Coolingair-cooledcorrect

Dimensions and weights

Length4,215 mmcorrect
Width1,870 mmcorrect
Height2,640 mmcorrect
Wheelbase2,440 mmcorrect
Ground clearance450 mmcorrect
Unladen weight3,780 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox15V/5R or 18V/6Rcorrect
Front tyres13.6 R 24 AScorrect
Rear tyres16.9 R 34 AScorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity130 lcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 15.9 kW/t (60 kW / 3.8 t)

Power class: Universal (40–100 hp)

Stronger than 57% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Deutz-Fahr AgroXtra 4.47 have?

The Deutz-Fahr AgroXtra 4.47 delivers 82 hp.

How much does the Deutz-Fahr AgroXtra 4.47 weigh?

The unladen weight is 3,780 kg.

What engine does the Deutz-Fahr AgroXtra 4.47 have?

4 cylinders, 4,086 cm³ displacement, Diesel.

How fast does the Deutz-Fahr AgroXtra 4.47 go?

Top speed is 30 km/h.

What are the dimensions of the Deutz-Fahr AgroXtra 4.47?

4,215 mm × 1,870 mm × 2,640 mm.

When was the Deutz-Fahr AgroXtra 4.47 built?

Production years: 1993–1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 23 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare