Cnh Steyr CVT - Zweite Generation
2 models in this series
CNH Steyr CVT – the powerful six-cylinder step with continuously variable transmission: CVT 6170 and CVT 6190, 126 to 141 kW, 6,597 cc, kerb weight 6,770 kg, rapeseed-diesel approved
At the top of Steyr's CVT range with the six-cylinder diesel and continuously variable transmission sit the CVT 6170 and CVT 6190; compared with the smaller CVT models, the same 6.6-litre block delivers noticeably more power here through boost and tuning, without any change in displacement or cylinder count. The higher torque places correspondingly higher demands on the gearbox, cooling and trailer brakes than on the less powerful CVT models.
Read on 3 more paragraphs
The register lists 2 variants at 126 to 141 kW from a six-cylinder diesel of 6,597 cc, a kerb weight of 6,770 kg, lengths of 4,766 to 4,776 mm, a width of 2,490 mm, a height of 3,000 mm and a rated 2,100 rpm; both models are approved for rapeseed diesel.
At close to 170 to 190 hp, these models target large arable farms, contractors and work with wide implements and heavy trailers, where CVT gearboxes show their strength under constantly changing draft loads; here they compete with the large CVT and Vario models from Case IH, Fendt and John Deere.
Buying one of these more powerful CVT models, the turbocharger and charge-air cooling matter especially, along with the condition of the transmission electronics and the CVT's cooling under sustained load, hydraulic output for heavy implements, and tyre and axle condition given the higher towed weights; servicing runs through the CNH network for Steyr and Case IH; with trailer work, the brake system and hitch are also worth checking.
Sources: SpecCodex register, model data: CNH Steyr CVT zweite Generation, Steyr (manufacturer)
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
