Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Cnh Steyr › CVT - Zweite Generation › CVT 6170

Cnh Steyr CVT 6170

Built: 2003–2006 · Series: CVT - Zweite Generation

More machines from model year 2003

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The CVT - Zweite Generation series from Cnh Steyr includes the CVT 6170. Production: 2003–2006. The engine delivers 171 hp (126 kW), has 6 cylinders, with a displacement of 6,597 cm³. Rated speed is 2,100 rpm. The machine is 4,766 mm long, 2,490 mm wide and 3,000 mm high. The unladen weight is 6,770 kg. The wheelbase measures 2,832 mm. Top speed is 40 km/h. Transmission: continuously variable. The engine is water-cooled. Tyres: front 540 / 65 R 30, rear 650 / 65 R 42. The fuel is Diesel / Rapsdiesel. Rated output across the Cnh Steyr range ranges from 65 to 240 hp; the CVT 6170 sits in the upper part of that range with 171 hp. Its immediate neighbours are the CVT 6160 below it with 160 hp and the CVT 6175 above it with 175 hp. Rated output across the Cnh Steyr range ranges from 48 to 176 kW; here the CVT 6170 sits in the upper part of that range with 126 kW. 28 Cnh Steyr models across 14 series are on record.

CNH Steyr CVT – the powerful six-cylinder step with continuously variable transmission: CVT 6170 and CVT 6190, 126 to 141 kW, 6,597 cc, kerb weight 6,770 kg, rapeseed-diesel approved

At the top of Steyr's CVT range with the six-cylinder diesel and continuously variable transmission sit the CVT 6170 and CVT 6190; compared with the smaller CVT models, the same 6.6-litre block delivers noticeably more power here through boost and tuning, without any change in displacement or cylinder count. The higher torque places correspondingly higher demands on the gearbox, cooling and trailer brakes than on the less powerful CVT models.

Read on 3 more paragraphs

The register lists 2 variants at 126 to 141 kW from a six-cylinder diesel of 6,597 cc, a kerb weight of 6,770 kg, lengths of 4,766 to 4,776 mm, a width of 2,490 mm, a height of 3,000 mm and a rated 2,100 rpm; both models are approved for rapeseed diesel.

At close to 170 to 190 hp, these models target large arable farms, contractors and work with wide implements and heavy trailers, where CVT gearboxes show their strength under constantly changing draft loads; here they compete with the large CVT and Vario models from Case IH, Fendt and John Deere.

Buying one of these more powerful CVT models, the turbocharger and charge-air cooling matter especially, along with the condition of the transmission electronics and the CVT's cooling under sustained load, hydraulic output for heavy implements, and tyre and axle condition given the higher towed weights; servicing runs through the CNH network for Steyr and Case IH; with trailer work, the brake system and hitch are also worth checking.

Sources: SpecCodex register, model data: CNH Steyr CVT zweite Generation, Steyr (manufacturer)

Technical data

Engine

FuelDiesel / Rapsdieselcorrect
Power171 hp (126 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement6,597 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,766 mmcorrect
Width2,490 mmcorrect
Height3,000 mmcorrect
Wheelbase2,832 mmcorrect
Unladen weight6,770 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearboxcontinuously variablecorrect
Front tyres540 / 65 R 30correct
Rear tyres650 / 65 R 42correct
Top speed40 km/hcorrect

Where this model stands

Power-to-weight ratio: 18.6 kW/t (126 kW / 6.8 t)

Power class: Large (100–180 hp)

Stronger than 88% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Cnh Steyr CVT 6170 have?

The Cnh Steyr CVT 6170 delivers 171 hp.

How much does the Cnh Steyr CVT 6170 weigh?

The unladen weight is 6,770 kg.

What engine does the Cnh Steyr CVT 6170 have?

6 cylinders, 6,597 cm³ displacement, Diesel / Rapsdiesel.

How fast does the Cnh Steyr CVT 6170 go?

Top speed is 40 km/h.

What are the dimensions of the Cnh Steyr CVT 6170?

4,766 mm × 2,490 mm × 3,000 mm.

When was the Cnh Steyr CVT 6170 built?

Production years: 2003–2006.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare