Citroen/carpol Other models
1 model in this series
Carpol body on a Citroën Jumper chassis: 2.0-litre four-cylinder engine, 3,500kg gross weight, 1,100kg payload, 4,040mm wheelbase
Behind the name Citroen/carpol stands a body builder that fitted a Citroën Jumper chassis with its own body; the chassis itself comes from Citroën, the body from Carpol.
Read on 3 more paragraphs
The Jumper is recorded with a four-cylinder diesel engine of 2.0 litres (1,997cc). With a gross vehicle weight of 3,500kg and an unladen weight of 2,400kg, a payload of 1,100kg remains. Wheelbase and width are 4,040mm and 2,160mm respectively, dimensions of a medium-length van.
The Citroën Jumper shares its chassis with the Fiat Ducato and Peugeot Boxer and, like them, is offered in several wheelbase and body-length variants. A payload of 1,100kg at full gross vehicle weight points to a comparatively light body, typical of panel vans without elaborate interior fitting, leaving plenty of room for cargo without a large payload margin. As an N1-category vehicle up to 3,500kg, it can be driven on a category B licence.
On this chassis, checks include the turbocharger, the condition of the front double-wishbone axle and the EGR valve, and, on vehicles with a box body, the body's mounting to the frame and the tightness of the roof and doors against moisture ingress into the load area. On panel vans in frequent commercial use, it is also worth checking the condition of the load-floor lining and the load-securing points.
Sources: SpecCodex-Register: Kennwerte des Modells Citroen/carpol Jumper
Models
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
