Case New Holland TN series
1 model in this series
New Holland TN-75 D/S (A): compact multi-purpose tractor with a 2,930cc three-cylinder diesel, 53 kW (72 hp) and 274 Nm of torque, built 1999 to 2004
Case New Holland is the group formed in 1999 from the merger of the Case Corporation with New Holland; under the group's roof, several tractor brands continued to run in parallel, including New Holland's compact TN range, to which the TN-75 covered here belongs.
Read on 3 more paragraphs
The TN-75 D/S (A) carries a water-cooled three-cylinder diesel engine of 2,930 cm³, producing 53 kW (72 hp) at 2,300 rpm and 274 Nm of torque. Unladen weight stands at 3,060 kg, at 3,980 mm long, 1,850 mm wide and 2,400 mm high on a 2,130 mm wheelbase; top speed is 30 km/h, typical for this class of tractor.
With a three-cylinder engine of just under 3 litres and around 53 kW, the TN-75 belongs to the class of compact multi-purpose tractors used on small and medium-sized farms, for grassland maintenance and for work with a front loader and light towed implements.
When buying a TN-75 used, the condition of the three-cylinder engine and its injection pump after many operating hours matters, along with the tightness of the cooling system and the state of the clutch. Also worth checking are the hydraulic pump serving the lift function, possible corrosion damage to the frame and mudguards, and, if the machine has done front-loader work, the condition of the front axle and its bearings, which take the heaviest load in that duty.
Sources: SpecCodex-Register: Kennwerte des Modells New Holland TN-75 D/S (A), New Holland (manufacturer)
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
