Blysz Other models
2 models in this series
Blysz Indiana 42: the only trailer of this brand outside the named ranges, model year 2011, 3,500 kg gross weight, 860 kg unladen weight
This page carries the only trailer model of Blysz that the register did not assign to a named range: the Indiana 42 from 2011. The brand belongs to the segment of smaller, light general-purpose and special trailers.
Read on 3 more paragraphs
The Indiana 42 has a gross weight of 3,500 kg against an unladen weight of 860 kg, giving a payload of 2,640 kg. At a width of only 2,000 mm and six wheels on several axles, it is built narrower than most road trailers of this weight class.
With a gross weight of 3,500 kg, the Indiana 42 falls into EU category O2, where the brakes are usually an overrun design. The narrow track under 2.10 m points to a load that is itself narrow, such as a boat or a machine of limited width, rather than to a trailer with a wide box body; such a build also passes more easily through narrow gateways and tight access roads than a wide general-purpose trailer.
On a used example, what counts is the condition of the axles and wheel bearings on all wheels, the function of the overrun brake and its linkage, rust on the frame and drawbar, the state of lighting, plug, tyres and rims, and the tightness of the bearing seals after any contact with water. With an unusually high wheel and axle count for its weight, it is also worth checking that all axles carry load evenly and none merely trails along without bearing weight.
Sources: SpecCodex-Register: Kennwerte des Modells Indiana 42
Models
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
