Blysz INDIANA 42
Built: 2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Blysz Indiana 42: the only trailer of this brand outside the named ranges, model year 2011, 3,500 kg gross weight, 860 kg unladen weight
This page carries the only trailer model of Blysz that the register did not assign to a named range: the Indiana 42 from 2011. The brand belongs to the segment of smaller, light general-purpose and special trailers.
Read on 3 more paragraphs
The Indiana 42 has a gross weight of 3,500 kg against an unladen weight of 860 kg, giving a payload of 2,640 kg. At a width of only 2,000 mm and six wheels on several axles, it is built narrower than most road trailers of this weight class.
With a gross weight of 3,500 kg, the Indiana 42 falls into EU category O2, where the brakes are usually an overrun design. The narrow track under 2.10 m points to a load that is itself narrow, such as a boat or a machine of limited width, rather than to a trailer with a wide box body; such a build also passes more easily through narrow gateways and tight access roads than a wide general-purpose trailer.
On a used example, what counts is the condition of the axles and wheel bearings on all wheels, the function of the overrun brake and its linkage, rust on the frame and drawbar, the state of lighting, plug, tyres and rims, and the tightness of the bearing seals after any contact with water. With an unusually high wheel and axle count for its weight, it is also worth checking that all axles carry load evenly and none merely trails along without bearing weight.
Sources: SpecCodex-Register: Kennwerte des Modells Indiana 42
Technical data
Dimensions and weights
| Width | 2,000 mmcorrect |
|---|---|
| Wheelbase | 650 mmcorrect |
| Unladen weight | 860 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Blysz INDIANA 42 weigh?
The unladen weight is 860 kg.
What is the gross vehicle weight of the Blysz INDIANA 42?
3,500 kg.
Up to what speed is the Blysz INDIANA 42 approved?
Approved up to 100 km/h.
When was the Blysz INDIANA 42 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
