Agria Einachsschlepper
2 models in this series
Agria walking tractors 1600/1700 from Möckmühl: 5 hp, 191 to 252 cm³ displacement, about 89 to 120 kg weight, two-stroke and four-stroke engines
Agria, based in Möckmühl in Baden-Württemberg, is among the well-known German makers of walking tractors and small motorised implements for agriculture, horticulture and viticulture. The 1600 and 1700 models belong to the small, light single-axle machines of the range, used as a power unit for attached implements such as a rotary tiller, sickle-bar mower or trailer. Besides the power unit itself, Agria offered a wide range of attached implements for the walking tractors, from a rotary harrow to a snow blower, so the machines could be used all year round.
Read on 3 more paragraphs
The register lists here 2 versions with 5 hp from single-cylinders of 191 to 252 cm³ displacement, weights of about 89 to 120 kg, a length of 1,320 to 1,700 mm, a width of 610 to 720 mm and a height of 1,050 to 1,200 mm at about 3,000 rpm; the fuels given are two-stroke mix and petrol or diesel.
Light walking tractors such as the Agria 1600 and 1700 were common on small-structured holdings, on the steep slopes of viticulture and orcharding, and in amenity maintenance, where their low weight and manoeuvrability told against four-wheel tractors.
On these small used Agria models, condition of cylinder and piston, on two-stroke engines the mix ratio and condition of the seals, condition of clutch and gearbox, and rust on frame and side rails count; parts are available through Agria and dealers specialising in walking tractors.
Sources: SpecCodex register, model data: Agria Einachsschlepper, Agria-Werke GmbH (manufacturer)
Models
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.