Agria 1700
Built: 1956–1968 · Series: Einachsschlepper
More machines from model year 1956
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Agria walking tractors 1600/1700 from Möckmühl: 5 hp, 191 to 252 cm³ displacement, about 89 to 120 kg weight, two-stroke and four-stroke engines
Agria, based in Möckmühl in Baden-Württemberg, is among the well-known German makers of walking tractors and small motorised implements for agriculture, horticulture and viticulture. The 1600 and 1700 models belong to the small, light single-axle machines of the range, used as a power unit for attached implements such as a rotary tiller, sickle-bar mower or trailer. Besides the power unit itself, Agria offered a wide range of attached implements for the walking tractors, from a rotary harrow to a snow blower, so the machines could be used all year round.
Read on 3 more paragraphs
The register lists here 2 versions with 5 hp from single-cylinders of 191 to 252 cm³ displacement, weights of about 89 to 120 kg, a length of 1,320 to 1,700 mm, a width of 610 to 720 mm and a height of 1,050 to 1,200 mm at about 3,000 rpm; the fuels given are two-stroke mix and petrol or diesel.
Light walking tractors such as the Agria 1600 and 1700 were common on small-structured holdings, on the steep slopes of viticulture and orcharding, and in amenity maintenance, where their low weight and manoeuvrability told against four-wheel tractors.
On these small used Agria models, condition of cylinder and piston, on two-stroke engines the mix ratio and condition of the seals, condition of clutch and gearbox, and rust on frame and side rails count; parts are available through Agria and dealers specialising in walking tractors.
Sources: SpecCodex register, model data: Agria Einachsschlepper, Agria-Werke GmbH (manufacturer)
Technical data
Engine
| Fuel | Benzin/Dieselcorrect |
|---|---|
| Power | 6 hpcorrect |
| Rated speed | 3,000 rpmcorrect |
| Cylinders | 1correct |
| Displacement | 252 cm³correct |
Dimensions and weights
| Length | 1,700 mmcorrect |
|---|---|
| Width | 720 mmcorrect |
| Height | 1,200 mmcorrect |
| Unladen weight | 120 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | Schaltgetriebe 3 Gang (4. versteckt)correct |
| Reverse gears | 1correct |
| Top speed | 3 km/hcorrect |
Origin and approval
| Construction | Einachsercorrect |
|---|---|
| Units built | ca. 27000correct |
Where this model stands
Power-to-weight ratio: 36.8 kW/t (4 kW / 0.1 t)
Power class: Compact (< 40 hp)
Stronger than 0% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Agria 1700 have?
The Agria 1700 delivers 6 hp.
How much does the Agria 1700 weigh?
The unladen weight is 120 kg.
What engine does the Agria 1700 have?
1 cylinders, 252 cm³ displacement, Benzin/Diesel.
What are the dimensions of the Agria 1700?
1,700 mm × 720 mm × 1,200 mm.
When was the Agria 1700 built?
Production years: 1956–1968.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 15 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.