Start › Tractors › AGCO Massey Ferguson › 6400 series

AGCO Massey Ferguson 6400 series

10 models in this series

The 6400 series from AGCO Massey Ferguson comprises 10 models. Rated output ranges from 90 to 215 hp.

Massey Ferguson 6400 Series – Large Mid-Range, 2003 to 2013, with Four- and Six-Cylinder Engines, 66.2 to 158.2 kW/90 to 215 hp and Operating Weight from 4,400 to 7,860 kg

Pictured: AGCO Massey Ferguson MF 6497 A

The 6400 series covered Massey Ferguson's large mid-range class above the 5400 series from 2003 to 2013. According to the register, output of the recorded models ranges from 66.2 to 158.2 kW, using four- and six-cylinder engines with displacement from 4,399 to 7,368 cm³.

Read on 4 more paragraphs

Recorded operating weight runs from 4,400 to 7,860 kg, wheelbase from 2,553 to 3,050 mm, and top speed of the listed models is 40 km/h. The most powerful models, such as the MF 6497 A and MF 6499 A, marked the top end of the series.

The 6400 series targeted larger arable farms with higher power needs and sat in the AGCO range between the 5400 and 7700 series. For a used model, check the gearbox variant and emissions stage, as these changed considerably over the ten-year production run.

With rated outputs from 66.2 to 158.2 kW, the 6400 series spanned from ISO 730 Category II on the smaller models to Category III on the largest, each with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Over the ten-year production run from 2003 to 2013, engine technology moved through several emissions stages, from versions without exhaust treatment to later models with particulate filters or SCR technology.

Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network.

Sources: SpecCodex register, model data: Massey Ferguson 6400er-Baureihe, Massey Ferguson

Models compared

10 of 10 models.

	MF 6445 (A)2003–2013	MF 6455 (A)2003–2013	MF 6460 A2003–2013	MF 6465 A2003–2012	MF 6470 A2003–2012	MF 6475 A2003–2012	MF 6480 A2003–2012	MF 6495 A2003–2011	MF 6497 A2004–2011	MF 6499 A2004–2011
Power	66.2 kW	73.6 kW	84.6 kW	88.3 kW	92 kW	99.4 kW	106.7 kW	136.2 kW	136.2 kW	158.2 kW
Rated speed	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm
Cylinders	4	4	4	6	4	6	6	6	6	6
Displacement	4,399 cm³	4,399 cm³	4,399 cm³	5,987 cm³	4,399 cm³	5,987 cm³	5,987 cm³	6,598 cm³	6,598 cm³	7,368 cm³
Torque	341 Nm	371 Nm	443 Nm	–	468 Nm	–	–	–	–	869 Nm
Top speed	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h
Wheelbase	2,553 mm	2,553 mm	2,553 mm	2,848 mm	2,553 mm	2,848 mm	2,848 mm	3,050 mm	2,996 mm	2,996 mm
Length	4,225 mm	4,225 mm	4,225 mm	4,656 mm	4,225 mm	4,656 mm	4,656 mm	4,989 mm	5,068 mm	5,068 mm
Width	1,922 mm	1,922 mm	1,790 mm	1,922 mm	1,790 mm	2,014 mm	2,014 mm	2,071 mm	2,280 mm	1,976 mm
Height	2,035 mm	2,844 mm	2,840 mm	2,935 mm	2,840 mm	2,935 mm	2,935 mm	3,095 mm	3,096 mm	3,096 mm
Unladen weight	4,400 kg	4,400 kg	4,530 kg	4,970 kg	4,530 kg	5,960 kg	5,240 kg	6,300 kg	6,835 kg	7,860 kg

AGCO Massey Ferguson 6400 series

Massey Ferguson 6400 Series – Large Mid-Range, 2003 to 2013, with Four- and Six-Cylinder Engines, 66.2 to 158.2 kW/90 to 215 hp and Operating Weight from 4,400 to 7,860 kg

Models compared

Models

Tractor in 3D section

MF 6445 (A)

MF 6455 (A)

MF 6460 A

MF 6465 A

MF 6470 A

MF 6475 A

MF 6480 A

MF 6495 A

MF 6497 A

MF 6499 A