Start › Tractors › AGCO Massey Ferguson › 6200 series

AGCO Massey Ferguson 6200 series

8 models in this series

The 6200 series from AGCO Massey Ferguson comprises 8 models. Rated output ranges from 75 to 135 hp.

Massey Ferguson 6200 Series – Updated Mid-Range, 1999 to 2003, with Four- and Six-Cylinder Engines, 55.2 to 99 kW/75 to 135 hp and Operating Weight from 3,820 to 6,000 kg

Pictured: AGCO Massey Ferguson MF 6265 (A)

The 6200 series replaced the 6100 series in 1999 and was built until 2003. According to the register, output of the recorded models ranges from 55.2 to 99 kW, using four- and six-cylinder engines with displacement from 3,990 to 5,987 cm³.

Read on 4 more paragraphs

Recorded operating weight runs from 3,820 to 6,000 kg, wheelbase from 2,485 to 2,720 mm, and top speed of the listed models is 40 km/h. Compared with the previous series, the 6200 series received a revised cab and expanded electronics.

The 6200 series targeted medium to larger arable farms and was succeeded by the 6400 series in 2003. For a used model, check the gearbox variant, as powershift and Dyna versions were offered in parallel.

With rated outputs from 55.2 to 99 kW, the 6200 series likewise fell within the ISO 730 Category II range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute. Engines from the 1999 to 2003 production years still lacked exhaust gas recirculation, particulate filters or SCR technology.

Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network. Like the 6100 series, the 6200 series stayed within ISO 730 Category II and covered the same power take-off range.

Sources: SpecCodex register, model data: Massey Ferguson 6200er-Baureihe, Massey Ferguson

Models compared

8 of 8 models.

	MF 6235 (A)1999–2003	MF 6245 (A)1999–2003	MF 6255 (A)1999–2003	MF 6260 (A)1999–2003	MF 6265 (A)1999–2003	MF 6270 (A)1999–2003	MF 6280 (A)1999–2003	MF 6290 (A)1999–2003
Power	55.2 kW	62.6 kW	69.9 kW	77.3 kW	77.3 kW	84.6 kW	92 kW	99 kW
Rated speed	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm
Cylinders	4	4	4	6	4	6	6	6
Displacement	3,990 cm³	3,990 cm³	3,990 cm³	5,987 cm³	3,990 cm³	5,987 cm³	5,987 cm³	5,987 cm³
Torque	289 Nm	312 Nm	–	396 Nm	–	429 Nm	503 Nm	–
Top speed	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h
Wheelbase	2,485 mm	2,485 mm	2,485 mm	2,720 mm	2,574 mm	2,720 mm	2,720 mm	2,720 mm
Length	4,134 mm	4,134 mm	4,350 mm	4,390 mm	4,350 mm	4,550 mm	4,394 mm	5,170 mm
Width	1,922 mm	1,922 mm	2,071 mm	2,083 mm	2,033 mm	2,083 mm	2,760 mm	2,505 mm
Height	2,651 mm	2,701 mm	2,850 mm	2,900 mm	2,900 mm	2,900 mm	2,867 mm	2,900 mm
Unladen weight	3,820 kg	3,920 kg	4,195 kg	4,515 kg	4,530 kg	4,355 kg	4,815 kg	6,000 kg

AGCO Massey Ferguson 6200 series

Massey Ferguson 6200 Series – Updated Mid-Range, 1999 to 2003, with Four- and Six-Cylinder Engines, 55.2 to 99 kW/75 to 135 hp and Operating Weight from 3,820 to 6,000 kg

Models compared

Models

Tractor in 3D section

MF 6235 (A)

MF 6245 (A)

MF 6255 (A)

MF 6260 (A)

MF 6265 (A)

MF 6270 (A)

MF 6280 (A)

MF 6290 (A)