Start › Tractors › AGCO Massey Ferguson › 5400 series

AGCO Massey Ferguson 5400 series

15 models in this series

The 5400 series from AGCO Massey Ferguson comprises 15 models. Rated output ranges from 75 to 135 hp.

Massey Ferguson 5400 Series – Mid-Range Class, 2003 to 2013, with Four- and Six-Cylinder Engines, 55 to 99.4 kW/75 to 135 hp and Operating Weight from 3,800 to 5,425 kg

Pictured: AGCO Massey Ferguson MF 5480 (A)

The 5400 series formed Massey Ferguson's mid power class from 2003 to 2013, partly with the A suffix denoting an updated equipment generation. According to the register, output of the recorded models ranges from 55 to 99.4 kW, using four- and six-cylinder engines with displacement from 4,399 to 6,600 cm³.

Read on 4 more paragraphs

Recorded operating weight runs from 3,800 to 5,425 kg, wheelbase from 2,460 to 2,780 mm, and top speed of the listed models is 40 km/h. Model numbers follow the AGCO scheme, where the last two digits denote the power level within the series.

The 5400 series targeted medium arable and mixed farms and was built at AGCO's Beauvais plant in France. For a used model, check the gearbox variant, as both simple powershift and Dyna transmission versions were offered during the production run.

With rated outputs from 55 to 99.4 kW, the 5400 series fell within the ISO 730 Category II range for the rear three-point hitch, with a standard dual-speed power take-off at 540 and 1,000 revolutions per minute for medium-duty implements. Over the ten-year production run from 2003 to 2013, engine technology moved through several emissions stages, from versions without exhaust treatment to later models with particulate filters or SCR technology.

Massey Ferguson remains part of the AGCO group today, so spare parts for the engine, gearbox and hydraulics of this series run through the existing AGCO parts network.

Sources: SpecCodex register, model data: Massey Ferguson 5400er-Baureihe, Massey Ferguson

Models compared

12 of 15 models.

	MF 5410 A2011–2014	MF 54202012	MF 54202011–2013	MF 5425 (A)2003–2011	MF 5430 A2011–2013	MF 5435 (A)2003–2011	MF 5440 A2011–2013	MF 5445 (A)2003–2013	MF 5450 A2011–2013	MF 5455 (A)2003–2013	MF 5470 (A)2006–2012	MF 5480 (A)2007–2012
Power	55 kW	60 kW	58.9 kW	55.2 kW	66.2 kW	61.1 kW	73.6 kW	66.2 kW	77.3 kW	73.6 kW	92 kW	99.4 kW
Rated speed	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm	2,200 rpm
Cylinders	4	4	4	4	4	4	4	4	4	4	4	4
Displacement	4,399 cm³	4,400 cm³	4,399 cm³	4,400 cm³	4,399 cm³	4,400 cm³	4,399 cm³	4,400 cm³	4,399 cm³	4,400 cm³	4,399 cm³	4,900 cm³
Torque	310 Nm	–	–	294 Nm	379 Nm	300 Nm	–	–	–	–	503 Nm	625 Nm
Top speed	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h	40 km/h
Wheelbase	2,464 mm	2,460 mm	2,464 mm	2,464 mm	2,464 mm	2,463 mm	2,464 mm	2,464 mm	2,464 mm	2,463 mm	2,764 mm	2,764 mm
Length	4,221 mm	4,221 mm	4,221 mm	4,210 mm	4,221 mm	4,220 mm	4,221 mm	4,220 mm	4,221 mm	4,220 mm	4,081 mm	4,369 mm
Width	1,533 mm	2,034 mm	1,533 mm	2,014 mm	1,533 mm	2,014 mm	2,060 mm	2,014 mm	2,340 mm	2,014 mm	1,991 mm	2,278 mm
Height	2,707 mm	2,025 mm	2,750 mm	2,706 mm	2,707 mm	2,706 mm	2,750 mm	2,810 mm	2,750 mm	2,780 mm	2,820 mm	2,794 mm
Unladen weight	3,800 kg	3,800 kg	3,800 kg	3,945 kg	3,800 kg	3,945 kg	3,800 kg	3,915 kg	3,900 kg	3,935 kg	4,420 kg	4,287 kg

AGCO Massey Ferguson 5400 series

Massey Ferguson 5400 Series – Mid-Range Class, 2003 to 2013, with Four- and Six-Cylinder Engines, 55 to 99.4 kW/75 to 135 hp and Operating Weight from 3,800 to 5,425 kg

Models compared

Models

Tractor in 3D section

MF 5410 A

MF 5420

MF 5420

MF 5425 (A)

MF 5430 A

MF 5435 (A)

MF 5440 A

MF 5445 (A)

MF 5450 A

MF 5455 (A)

MF 5460 (A)

MF 5465 A

MF 5470 (A)

MF 5475 (A)

MF 5480 (A)