Zpc Ursus C-362
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zpc Ursus C-330M – Polish small tractor with two-wheel drive: Ursus S-312C engine, 6-plus-2-speed gearbox, 1,675 kg weight, 1,960 mm wheelbase, 1,590 mm wide
The Ursus C-330 is one of the best-known small tractors from the Polish maker Ursus, built in large numbers for smaller farms and exported beyond Poland to several countries of the former Eastern Bloc. The version recorded here, the C-330M, is fitted with two-wheel drive.
Read on 3 more paragraphs
The engine, designated Ursus S-312C, comes from the works' own production. The gearbox offers 6 forward and 2 reverse gears. At 3,080 mm long, 1,590 mm wide, with a 1,960 mm wheelbase and 1,675 kg weight, the C-330M is a light, compact standard tractor.
The C-330 was designed for small and medium farms, where a simple, rugged tractor of modest weight sufficed for tillage and light haulage. The S-312 engine line was factory-designed for easy maintenance and used across several Ursus small tractors of this weight class.
When buying a C-330, the condition of the clutch, the tightness of the hydraulic system and corrosion on the load-bearing sheet-metal parts matter most, as these tractors often stayed in service for decades. As the C-330 was built in very large numbers, it ranks among the Ursus models with the best spare-parts supply. A test run raising and lowering the hydraulics also shows whether the pump and control valves still work reliably, and a look underneath will reveal any welding repairs to the frame rails.
Sources: SpecCodex-Register: Kennwerte des Modells Zpc Ursus C-330M
Technical data
Engine
| Engine | Ursus S-4003correct |
|---|
Dimensions and weights
| Length | 3,560 mmcorrect |
|---|---|
| Height | 2,050 mmcorrect |
| Wheelbase | 2,130 mmcorrect |
| Unladen weight | 2,635 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 10/2correct |
Frequently asked questions
How much does the Zpc Ursus Ursus C-362 weigh?
The unladen weight is 2,635 kg.
What are the dimensions of the Zpc Ursus Ursus C-362?
3,560 mm × 2,050 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikipedia (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
