StartWheel loadersZettelmeyer › ZL8C

Zettelmeyer ZL8C

Series: Zettelmeyer Wheel Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zettelmeyer Wheel Loader series from Zettelmeyer includes the ZL8C. The engine delivers 35.4 hp (26 kW), has 2 cylinders. Rated speed is 3,000 rpm. The unladen weight is 2,930 kg. The wheelbase measures 1,801.4 mm. Ground clearance is 286.5 mm. The tank holds 45 litres. The hydraulic tank holds 45 litres. The electrical system runs on 12 V. Tyre size: 10,5-18. The Zettelmeyer Wheel Loader series covers 42 models. Rated output within it ranges from 30 to 306.2 hp; the ZL8C sits at the bottom of that range with 35.4 hp. Its immediate neighbours are the ZL302C below it with 30 hp and the ZL401 above it with 38.1 hp. 50 Zettelmeyer models across 4 series are on record. The model is listed under Wheel loaders. 14 verified figures from 1 source are on file.

Technical data

Engine

Power35.4 hp (26 kW)correct
Rated speed3,000 rpmcorrect
Cylinders2correct
Aspirationnaturalcorrect

Dimensions and weights

Wheelbase1,801.4correct
Ground clearance286.5correct
Unladen weight2,930 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission, reversibe and shiftablecorrect
Tyre size10.5-18correct
System voltage12 Vcorrect

Working data

Hydraulic oil capacity45 lcorrect
Fuel tank capacity45 lcorrect

Other data

Height2,496.3correct

Where this model stands

Power-to-weight ratio: 8.9 kW/t (26 kW / 2.9 t)

Stronger than 2% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zettelmeyer ZL8C have?

The Zettelmeyer ZL8C delivers 35.4 hp.

How much does the Zettelmeyer ZL8C weigh?

The unladen weight is 2,930 kg.

What engine does the Zettelmeyer ZL8C have?

2 cylinders.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare