StartWheel loadersZettelmeyer › ZL802Si

Zettelmeyer ZL802Si

Series: Zettelmeyer Wheel Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The ZL802Si from Zettelmeyer is part of the Zettelmeyer Wheel Loader series. The engine delivers 84.2 hp (59.7 kW), has 4 cylinders, with a displacement of 3,200.4 cm³. Torque is 300 Nm. Rated speed is 2,300 rpm. The unladen weight is 7,200 kg. The wheelbase measures 2,252.5 mm. Ground clearance is 573 mm. The tank holds 100.3 litres. The gearbox has 3 forward gears. There are also 2 reverse gears. Maximum torque is reached at 1,500 rpm. The pump delivers 90.1 l/min. The hydraulic tank holds 110.2 litres. The electrical system runs on 24 V. The engine fitted is the KHD BF 4M 1012 E. Tyre size: 15,5-25. The Zettelmeyer Wheel Loader series covers 42 models. Rated output within it ranges from 30 to 306.2 hp; the ZL802Si sits in the lower part of that range with 84.2 hp. Its immediate neighbours are the ZL18D below it with 80.1 hp and the ZL1001 above it with 85.2 hp. 50 Zettelmeyer models across 4 series are on record. The model is listed under Wheel loaders. 21 verified figures from 1 source are on file.

Technical data

Engine

Engine modelKHD BF 4M 1012 Ecorrect
Power84.2 hp (59.7 kW)correct
Rated speed2,300 rpmcorrect
Torque300correct
Speed at max. torque1,500 rpmcorrect
Cylinders4correct
Displacement3,200.4 cm³correct
Aspirationturbo + water cooledcorrect

Dimensions and weights

Wheelbase2,252.5correct
Ground clearance573correct
Unladen weight7,200 kgcorrect

Drivetrain and chassis

Gearbox typehydrostatic transmission full power shiftcorrect
Forward gears3correct
Reverse gears2correct
Tyre size15.5-25correct
System voltage24 Vcorrect

Working data

Pump flow90.1 l/mincorrect
Hydraulic oil capacity110.2 lcorrect
Fuel tank capacity100.3 lcorrect

Other data

Height2,862.1correct

Where this model stands

Power-to-weight ratio: 8.3 kW/t (60 kW / 7.2 t)

Stronger than 28% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zettelmeyer ZL802Si have?

The Zettelmeyer ZL802Si delivers 84.2 hp.

How much does the Zettelmeyer ZL802Si weigh?

The unladen weight is 7,200 kg.

What engine does the Zettelmeyer ZL802Si have?

4 cylinders, 3,200 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare