Zetor 9520/9540 – specifications
Built: 1992–1999 · Series: UR-3 Baureihe
The UR-3 series from Zetor includes the 9520/9540. Production: 1992–1999. The engine delivers 94 hp (69.1 kW), has 4 cylinders, with a displacement of 4,156 cm³. Torque is 373 Nm. Rated speed is 2,200 rpm. The machine is 4,190 mm long, 1,950 mm wide and 2,645 mm high. The unladen weight is 3,700 kg. The wheelbase measures 2,375 mm. Ground clearance is 352 mm. Top speed is 30 km/h. The tank holds 105 litres. Transmission: 18 V/6 R or 16 V/4 R. The engine is water-cooled. Tyres: front 7.50-20 ASF (A: 12.4 R 24 AS), rear 16.9 R 38 AS. The fuel is diesel. The bore measures 105 mm. The stroke is 120 mm. Maximum torque is reached at 1,400 rpm. Construction: unit construction (no separate frame). The linkage is category II. The PTO runs at 540/1000 rpm. The UR-3 Baureihe series covers 4 models. Rated output within it ranges from 70 to 103 hp; the 9520/9540 sits in the upper part of that range with 94 hp. Its immediate neighbours are the 8520/8540 below it with 84 hp and the 10540 above it with 103 hp. Unladen weight within it ranges from 3,475 to 4,255 kg; here the 9520/9540 sits in the lower part of that range with 3,700 kg. 371 Zetor models across 27 series are on record.
Data for the version built 1992–1999 · Data origin: Reference work (Wikipedia/Wikibooks) · sources
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zetor UR III – tractors 7520/7540, 8520/8540, 9520/9540 and 10540 from Brno in the 1990s, four-cylinder diesels from 52 to 76 kW with a uniform 4.16-litre displacement, two- and four-wheel-drive variants
With the UR III generation, Zetor replaced the preceding Crystal series (UR II) from the 1990s onward, still built at the home plant in Brno. Type numbers 7520 to 10540 reflect the power class in horsepower in their first two digits, while the last two digits, 20 and 40, distinguish the drive type at Zetor: models ending in 20 are two-wheel-drive tractors, models ending in 40 are four-wheel-drive versions of the same base type. All four sizes in this range share the same four-cylinder engine of 4.16 litres displacement.
Read on 3 more paragraphs
The register lists four versions here with 51.5 to 75.8 kW from four-cylinder diesel engines with a uniform 4,156 cm³ displacement. Rated speed is 2,200 rpm, unladen weight ranges from 3,475 to 4,255 kg with lengths from 4,190 to 4,380 mm, widths from 1,950 to 2,100 mm and heights from 2,640 to 2,705 mm; torque lies between 238 and 373 Nm.
The UR III series targeted medium-sized farms in central and eastern Europe and, after the political changes of the 1990s, stood for the first time in direct competition with western European brands such as Fendt, Deutz-Fahr and Case IH, which were newly pushing into the Czech and Slovak markets.
When buying used, check the condition of the clutch and gearbox, tightness of the hydraulic pump, on the four-wheel-drive models additionally the front axle differential and driveshafts, and corrosion on the wings and cab floor. Parts are well available through Zetor's distribution and a dense network of eastern European specialist dealers.
Sources: SpecCodex register, model data: Zetor UR-3 Baureihe, Zetor (manufacturer)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 94 hp (69.1 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 373 Nmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,156 cm³correct |
| Bore | 105 mmcorrect |
| Stroke | 120 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,190 mmcorrect |
|---|---|
| Width | 1,950 mmcorrect |
| Height | 2,645 mmcorrect |
| Wheelbase | 2,375 mmcorrect |
| Ground clearance | 352 mmcorrect |
| Unladen weight | 3,700 kgcorrect |
Drivetrain and chassis
| Drive | rear- or four-wheel drivecorrect |
|---|---|
| Gearbox | 18 V/6 R or 16 V/4 Rcorrect |
| Front tyres | 7.50-20 ASF (A: 12.4 R 24 AS)correct |
| Rear tyres | 16.9 R 38 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 105 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Frequently asked questions
Where this model stands
Power-to-weight ratio: 18.7 kW/t (69 kW / 3.7 t)
Power class: Universal (40–100 hp)
Stronger than 63% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 27 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.