Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Zetor › PROXIMA 100

Zetor PROXIMA 100

Built: 2012-2014 · Series: PROXIMA

More machines from model year 2012

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Zetor PROXIMA 100 belongs to the PROXIMA series. Production: 2012-2014. The engine delivers 70.4 kW, has 4 cylinders, with a displacement of 4,156 cm³. The machine is 4,050 mm long and 2,000 mm wide. The unladen weight is 3,990 kg. The gross vehicle weight is 5,500 kg. The gearbox offers 12 gears. The PROXIMA series covers 60 models. Rated output within it ranges from 44.9 to 86.2 kW; the PROXIMA 100 sits in the upper part of that range with 70.4 kW. Its immediate neighbours are the Proxima power 95 below it with 68.2 kW and the PROXIMA PLUS 10541 above it with 74 kW. Unladen weight within it ranges from 3,130 to 5,000 kg; here the PROXIMA 100 sits in the middle of that range with 3,990 kg. 371 Zetor models across 27 series are on record.

Zetor Proxima: the Czech entry-level line of the 2000s, from the PROXIMA 65 to the PROXIMA 95, 44.9 to 86.2 kW, four-cylinder engines throughout with water cooling

The Proxima is Zetor's straightforward mid-range series, built in Brno. It launched in 2004 as part of the new Unified Row I (UR I) generation, which replaced older Zetor lines with engines meeting tighter emissions limits, and stayed in the catalogue well into the 2010s.

Read on 4 more paragraphs

The register lists 41 live models in this series, from the PROXIMA 65 up to the PROXIMA 95, plus the four-wheel-drive variants PROXIMA 6441, 7441 and 8441 with their 4x4 designations. Output ranges from 44.9 to 86.2 kW, weight from 3,130 to 5,000 kg. All models share a four-cylinder engine of roughly 4,150 cm3.

Zetor positioned the Proxima deliberately below the more powerful Forterra as a budget-conscious all-rounder for smaller and mid-sized farms: mechanical transmission, a simple cab, limited electronics. That made it one of Zetor's best-selling lines across Central and Eastern Europe.

Buyers looking at a used Proxima should check whether four-wheel drive was fitted as standard, since it was not on every early model, and inspect the clutch and gearbox for wear after high operating hours.

The 12 to 24 gears recorded in the register point to the creeper gear groups available on the Proxima for very slow work with implements such as potato planters or mulchers, alongside the normal field and road gearing. In this power class of 44.9 to 86.2 kW, the ISO 730 three-point linkage is mostly built to Category I or II, with the PTO running at the standard 540 rpm speed.

Sources: SpecCodex register, model data: Zetor Proxima, Zetor

Technical data

Engine

Power70.4 kWcorrect
Cylinders4correct
Displacement4,156 cm³correct

Dimensions and weights

Length4,050 mmcorrect
Width2,000 mmcorrect
Unladen weight3,990 kgcorrect
Gross vehicle weight5,500 kgcorrect

Drivetrain and chassis

Gears12correct

Where this model stands

Power-to-weight ratio: 17.6 kW/t (70 kW / 4 t)

Power class: Universal (40–100 hp)

Stronger than 64% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zetor PROXIMA 100 have?

The Zetor PROXIMA 100 delivers 70.4 kW.

How much does the Zetor PROXIMA 100 weigh?

The unladen weight is 3,990 kg.

What is the gross vehicle weight of the Zetor PROXIMA 100?

5,500 kg.

What engine does the Zetor PROXIMA 100 have?

4 cylinders, 4,156 cm³ displacement.

What are the dimensions of the Zetor PROXIMA 100?

4,050 mm × 2,000 mm.

When was the Zetor PROXIMA 100 built?

Production years: 2012-2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare