Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Zetor › 9 er-Serie (UR 1) › 4911

Zetor 4911 – specifications

Built: 1977–1980 · Series: 9 er-Serie (UR 1)

Data for the version built 1977–1980 · Data origin: Reference work (Wikipedia/Wikibooks) · sources

More machines from model year 1977

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 4911 from Zetor is part of the 9er-Serie (UR 1) series. Production: 1977–1980. The engine delivers 45 hp (33.1 kW), has 3 cylinders, with a displacement of 2,697 cm³. The engine comes from Zetor. Torque is 143 Nm. Rated speed is 2,200 rpm. The machine is 3,290 mm long, 1,780 mm wide and 2,400 mm high. The unladen weight is 2,170 kg. The wheelbase measures 1,988 mm. Ground clearance is 480 mm. Top speed is 25 km/h. The tank holds 47 litres. Transmission: 10 V/2 R. The engine is water-cooled. Tyres: front 6.00-16 ASF, rear 12.4-28 AS. The model was built in Czechoslovakia. The fuel is diesel. The bore measures 102 mm. The stroke is 110 mm. Maximum torque is reached at 1,480 rpm. Construction: unit construction (no separate frame). The gearbox offers 10 forward gears. There are also 2 reverse gears. The linkage is category II. The PTO runs at 540/1000 rpm. Rated output across the Zetor range ranges from 15 to 160 hp; the 4911 sits in the lower part of that range with 45 hp. Its immediate neighbours are the HT 45 below it with 43 hp and the 5211/5245 above it with 47 hp. Rated output across the Zetor range ranges from 22 to 160 hp; here the 4911 sits in the lower part of that range with 45 hp. 371 Zetor models across 27 series are on record.

Zetor 9 series (UR 1): the more powerful types of the Unified Range I generation from Brno, 4911 and 6911/6945 with three- and four-cylinder diesel engine, 33.1 to 47.8 kW, 2,697 to 3,594 cm³

This page lists the more powerful types of Zetor's Unified Range I generation from Brno (Czechia): the 4911 with a three-cylinder engine and the 6911 (also listed as 6945) with a four-cylinder engine, both built on the range's shared cylinder unit, with which Zetor covered its mid and upper power class from the 1960s, above the smaller types of the same generation.

Read on 3 more paragraphs

The register lists here 2 versions with 33.1 to 47.8 kW from three to four cylinders of 2,697 to 3,594 cm³ displacement, unladen weights of 2,170 to 2,870 kg, lengths of 3,290 to 3,655 mm, widths of 1,780 to 1,840 mm, heights of 2,400 to 2,475 mm and torque of 143 to 198 Nm; the engines run at 2,200 revolutions per minute.

With this power class Zetor served the medium-sized farms of the Eastern Bloc and exported the tractors in large numbers across the whole Comecon area as well as to Western Europe, Africa and Asia, where they were valued for their robust, easily repaired engineering and the ready availability of parts for the shared engine base.

On used examples, engine condition and compression, the condition of clutch and mechanical gearbox, rust on sheet metal and cab, and the function of hydraulics and PTO count; spare parts for the Z engine series are available through the Eastern European used market and specialist Zetor parts dealers.

Sources: SpecCodex register, model data: Zetor 9er-Serie (UR 1), Zetor (manufacturer)

Technical data

Engine

Engine makeZetorcorrect
Fueldieselcorrect
Power45 hp (33.1 kW)correct
Rated speed2,200 rpmcorrect
Torque143 Nmcorrect
Speed at max. torque1,480 rpmcorrect
Cylinders3correct
Displacement2,697 cm³correct
Bore102 mmcorrect
Stroke110 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length3,290 mmcorrect
Width1,780 mmcorrect
Height2,400 mmcorrect
Wheelbase1,988 mmcorrect
Ground clearance480 mmcorrect
Unladen weight2,170 kgcorrect

Drivetrain and chassis

Driverear-wheel drivecorrect
Gearbox10 V/2 Rcorrect
Forward gears10correct
Reverse gears2correct
Front tyres6.00-16 ASFcorrect
Rear tyres12.4-28 AScorrect
Top speed25 km/hcorrect

Working data

Fuel tank capacity47 lcorrect

Origin and approval

PlantCzechoslovakiacorrect
Constructionunit construction (no separate frame)correct

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 15.3 kW/t (33 kW / 2.2 t)

Power class: Universal (40–100 hp)

Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Zetor 4911 have?

The Zetor 4911 delivers 45 hp.

How much does the Zetor 4911 weigh?

The unladen weight is 2,170 kg.

What engine does the Zetor 4911 have?

3 cylinders, 2,697 cm³ displacement, Diesel.

How fast does the Zetor 4911 go?

Top speed is 25 km/h.

What are the dimensions of the Zetor 4911?

3,290 mm × 1,780 mm × 2,400 mm.

When was the Zetor 4911 built?

Production years: 1977–1980.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 33 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​​​‌‌⁠‌‌​​‌​​⁠⁠​‌‍‌‌

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare