Zetor 5011
Built: 1980–1984 · Series: 10 er-Serie (UR-1)
More machines from model year 1980
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Zetor 10 series (UR I) – types 5011, 6011/6045 and 7011/7045 of the Brno Unified Range I: three- and four-cylinder diesels, 33.1 to 47.8 kW, 2.67 to 2.93 t unladen weight, 2,696 to 3,595 cm³
From the mid-1960s Zetor developed in Brno the Unified Range I (UR I), a new, modularly built tractor generation. This collective page brings together the types 5011, 6011/6045 and 7011/7045 from the UR I's 10 series; the first two digits give the size class, while the last two distinguish the base version (11) from a revised variant (45), as shown by the double designations 6011/6045 and 7011/7045 in the register.
Read on 3 more paragraphs
The register lists 3 versions with 33.1 to 47.8 kW from three- and four-cylinder diesel engines of 2,696 to 3,595 cm³ displacement, torque figures of 147 to 200 Nm at 2,200 rpm. Unladen weights range from 2,670 to 2,930 kg, lengths from 3,375 to 3,720 mm, widths from 1,810 to 1,850 mm and heights from 2,620 to 2,650 mm.
As the mid-sized build of the UR I, the 10 series covered the segment between the smaller 7-series types and the large Zetor Crystal tractors, and was widespread both in Czechoslovakia and through export to other Comecon states and Western Europe. In Czechoslovak agricultural cooperatives and state farms it ranked, alongside the smaller UR I types, among the most widely used tractors for fieldwork, transport and implement towing.
When buying used, check gearbox and clutch, the hydraulic seals, rust on cab and wings, and the cylinder head and injection pump; parts for engine and drivetrain remain available through the Czech Zetor parts trade.
Sources: SpecCodex register, model data: Zetor 10er-Serie (UR I)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 45 hp (33.1 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 147 Nmcorrect |
| Speed at max. torque | 1,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 2,696 cm³correct |
| Bore | 102 mmcorrect |
| Stroke | 110 mmcorrect |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 3,375 mmcorrect |
|---|---|
| Width | 1,810 mmcorrect |
| Height | 2,620 mmcorrect |
| Wheelbase | 2,025 mmcorrect |
| Ground clearance | 440 mmcorrect |
| Unladen weight | 2,670 kgcorrect |
Drivetrain and chassis
| Drive | rear-wheel drivecorrect |
|---|---|
| Gearbox | 10 V/2 Rcorrect |
| Forward gears | 10correct |
| Reverse gears | 2correct |
| Front tyres | 6.50 ASFcorrect |
| Rear tyres | 14.9-28 AScorrect |
| Top speed | 25 km/hcorrect |
Working data
| Fuel tank capacity | 47 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|---|
| Units built | 53.322 (inkl. 6011-7045)correct |
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 12.4 kW/t (33 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 29% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Zetor 5011 have?
The Zetor 5011 delivers 45 hp.
How much does the Zetor 5011 weigh?
The unladen weight is 2,670 kg.
What engine does the Zetor 5011 have?
3 cylinders, 2,696 cm³ displacement, Diesel.
How fast does the Zetor 5011 go?
Top speed is 25 km/h.
What are the dimensions of the Zetor 5011?
3,375 mm × 1,810 mm × 2,620 mm.
When was the Zetor 5011 built?
Production years: 1980–1984.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 30 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.