Yanmar Ke - 160 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Yanmar Ke - 160 belongs to the Yanmar 4WD Tractor series. 16 hp (10.4 kW) is what the three-cylinder engine gets out of 785 cm³. Rated power is reached at 2,500 rpm.
At 13 km/h, that is as fast as it goes. Empty, it weighs 580 kg.
Within the range, rated power spans from 14.1 to 59.7 hp; with 16.1 hp, the Ke - 160 sits at the bottom end. Directly alongside are the Ke - 140 with 14.1 hp below and the Ke - 200H with 20.3 hp above.
Technical data
Engine
| Engine model | 3TNE68correct |
|---|---|
| Power | 16.1 hp (10.4 kW)correct |
| Rated speed | 2,500 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 784.9 cm³correct |
Dimensions and weights
| Ground clearance | 245.1correct |
|---|---|
| Unladen weight | 580 kgcorrect |
Drivetrain and chassis
| Gearbox type | Transmission driven P/T/O (SAE 1 - 3/8)correct |
|---|---|
| Forward gears | 8correct |
| Reverse gears | 4correct |
| Tyre size | Front 5 - 12, Rear 8-16correct |
| Top speed | 13.2 km/hcorrect |
| System voltage | 12 Vcorrect |
Working data
| Fuel tank capacity | 13.2 lcorrect |
|---|
Other data
| Height | 2,170.2correct |
|---|
Where this model stands
Power-to-weight ratio: 17.9 kW/t (10 kW / 0.6 t)
Power class: Compact (< 40 hp)
Stronger than 3% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Yanmar Ke - 160 have?
The Yanmar Ke - 160 delivers 16.1 hp.
How much does the Yanmar Ke - 160 weigh?
The unladen weight is 580 kg.
What engine does the Yanmar Ke - 160 have?
3 cylinders, 785 cm³ displacement.
How fast does the Yanmar Ke - 160 go?
Top speed is 13.2 km/h.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.