Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › KhTZ › XTZ-243

KhTZ XTZ-243

Series: XTZ-240

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

As a tractor, the XTZ-243 belongs to the XTZ-240 series. Under the bonnet works a six-cylinder engine displacing 6.7 litres, producing 250 hp (184 kW). Rated power is reached at 2,100 rpm. It runs on diesel; the engine is water-cooled.

XTZ-242 by the Kharkov Tractor Plant – water-cooled eight-cylinder engine with 14.9-litre displacement, 240 hp, 176 kW and a 5 t hydraulic lift capacity.

The XTZ-242 belongs to the XTZ-240 series from the Kharkov Tractor Plant and marks the top power class in the manufacturer's line-up. With an eight-cylinder engine, the plant adopts a drivetrain concept otherwise found in tractor building only in the very largest field tractors.

Read on 3 more paragraphs

The water-cooled eight-cylinder diesel engine, with a displacement of 14,860 cm³, delivers 240 hp, or 176 kW, at 2,100 rpm. The hydraulics lift up to 5,000 kg. With a wheelbase of 2,860 mm and a width of 2,460 mm, the tractor reaches a length of 6,596 mm and a height of 3,565 mm – dimensions that clearly place the XTZ-242 in the class of the heaviest field tractors.

Eight-cylinder tractors of this size are built for professional work on large arable fields, where heavy cultivators, wide ploughs and large seeding equipment demand both high pulling force and high hydraulic lift capacity at the same time. The large displacement of nearly 15 litres allows high torque at moderate engine speed, which benefits fuel consumption and engine wear in continuous operation.

When buying a used XTZ-242, the condition of the cooling system for the large-volume eight-cylinder engine is particularly important, as are the hydraulic pumps given the high 5,000 kg lift capacity. The engine, turbocharger and injection system should be checked by a specialist workshop before taking on such a large and complex machine second-hand. Spare parts, being less widespread outside the manufacturer's home region, are not equally available everywhere.

Sources: SpecCodex-Register: Kennwerte des Modells XTZ-242

Technical data

Engine

Fueldieselcorrect
Power250 hp (184 kW)correct
Rated speed2,100 rpmcorrect
Cylinders6correct
Displacement6,670 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Ground clearance400 mmcorrect

Working data

Lifting capacity5,000 kgcorrect

Origin and approval

Constructionarticulated framecorrect

Frequently asked questions

How much power does the KhTZ XTZ-243 have?

The KhTZ XTZ-243 delivers 250 hp.

What engine does the KhTZ XTZ-243 have?

6 cylinders, 6,670 cm³ displacement, Diesel.

How much does the rear linkage of the KhTZ XTZ-243 lift?

The rear linkage lifts 5,000 kg.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare