Wonder WEA 160M4 – specifications
Series: WEA
The Wonder WEA 160M4 is a three-phase induction motor from the WEA series. The rated output is 11 kW. The motor is four-pole, which at 50 Hz gives a synchronous speed of 1,500 rpm. The housing is frame size 160 M in foot-mounted form. The protection class is IP55, IP56 and IP66. The efficiency is 90.9 per cent at full load, 91.5 per cent at 75 per cent load and 90.9 per cent at half load. The motor is built in China. The data is based on the Australian MEPS registration under the GEMS Determination 2012; measured to IEC 60034-2-1 (Edition 2.0). The WEA series covers 11 models. Rated output within it ranges from 1.1 to 22 kW; the WEA 160M4 sits in the middle of that range with 11 kW. Its immediate neighbours are the WEA 160M-6 below it with 7.5 kW and the WEA 160L-4 above it with 15 kW. 80 Wonder models across 5 series are on record.
Build year not documented · Data origin: Official register · sources
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Wonder WEA – three-phase motors made in China across the full pole spectrum: frame sizes 100 to 180, 1.1 to 22 kW, two- to eight-pole, efficiency 75 to 92%, four-voltage design
The WEA range extends Wonder's line-up beyond the purely low-speed WE range to the full common pole spectrum from two to eight poles. The type plates WEA 160L-4, WEA 160M1-2 and WEA 180L6 show that fast-running two-pole and slow-running six- and eight-pole variants are listed under the same series name. This lets WEA cover a broader field of applications on a single collective page than the specialised WE range.
Read on 3 more paragraphs
The register lists 11 versions with 1.1 to 22 kW rated output, two- to eight-pole, at a uniform four-voltage combination of 400/415/440/690 V. Full-load efficiency ranges from 74.98 to 92.04%, and at 75% load from 75.14 to 92.28%. Frame sizes span 100 to 180.
The span from two- to eight-pole motors under the same series name allows a single brand family to serve both fast-running pump and compressor drives and slow-running agitators and fans. Efficiency correlates noticeably with frame size: larger, more powerful versions tend to reach the upper end of the stated range.
For a replacement in this broad range, the exact match of pole count and frame size to the existing drive matters most, since WEA motors, despite sharing a series name, cover technically very different speed ranges. The uniform, extensive mounting code with foot, flange and vertical variants nonetheless makes finding spare parts within the range easier.
Sources: SpecCodex register, model data: Wonder WEA, Zulassungsdaten GEMS/MEPS (Australien, Neuseeland)
Technical data
Engine
| Rated output | 11 kWcorrect |
|---|
Electrical data
| Rated voltage | 400/415/440/690 Vcorrect |
|---|---|
| Number of poles | 4correct |
| Protection class | IP55, IP56, IP66correct |
| Frame size | 160 M (foot)correct |
| Mounting (IEC 60034-7) | B3, B5, B6, B7, B8, B35, V1, V3, V5, V6, V36correct |
| Efficiency at full load | 90.91 %correct |
| Efficiency at 75 % load | 91.47 %correct |
| Efficiency at half load | 90.89 %correct |
Origin and approval
| Country of manufacture | Chinacorrect |
|---|
Other data
| Standard applied | Greenhouse and Energy Minimum Standards (Three Phase Electric Motors) Determination 2012correct |
|---|---|
| Test method | IEC 60034-2-1 (Edition 2.0)correct |
Frequently asked questions
What to check before buying
- Match the data plate against the order: frame size, mounting and rating have to agree.
- Check the ingress rating against the installation site — outdoors or in dust the demands differ.
- Hold the mounting form and dimensions against the existing seat before ordering.
- The pole count sets the speed — when replacing an older unit, compare this first.
- For used units, ask about winding condition and bearing play.
- Ask about parts availability for this series — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 22 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
WEA 100L2-8
WEA 160L-4
WEA 160L-6
WEA 160L2
WEA 160M-6
WEA 160M1-2
WEA 160M2-2
WEA 180L-4
WEA 180L6
WEA 180M-4
Sources: Energy Rating — Australian government equipment register (retrieved August 2026) · Data sources and cross-checks
Electric motor in 3D section
Turn the model, look inside and click an assembly — each one is explained.