Triumph Dolomite – specifications
Built: 1972–1980 · Series: Other models
Data for the version built 1972–1980
More machines from model year 1972
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Triumph Motor Company Triumph Dolomite belongs to the Weitere Modelle series; it rolled off the line as a machine in 1972–1980.
The predecessor was the Triumph Toledo; Triumph 1300; Triumph 1500, the successor the Triumph Acclaim.
Triumph 2000, 2.5PI and 2500: a British upper mid-size saloon with a 1,998 cm³ straight-six engine, bodywork by Michelotti and around 324,652 units built 1963–1977
The Triumph 2000 is a British upper mid-size saloon built by the Triumph Motor Company between 1963 and 1977 in the 2000, 2.5PI and 2500 forms. The bodywork was penned by the Italian designer Michelotti, who also worked on other Triumph models. In the line-up it followed the Standard Vanguard and was later succeeded in the market by the Rover SD1, which took over the role of Leyland's large executive saloon. This is not a class N1 van but a classic passenger car.
Read on 3 more paragraphs
The straight-six engine displaces 1,998 cm³ and was offered with either a carburettor or mechanical fuel injection depending on the version. The body came as a four-door saloon and a five-door estate, both around 1,435 mm tall and about 1,714 mm wide. The gearbox was available as a plain manual, a manual with overdrive, or an automatic, and the fuel tank held around 62.5 litres.
As a 1960s and 1970s saloon, the Triumph 2000 represents the British executive class of its era: rear-wheel drive, a torquey six-cylinder engine and an upmarket cabin finish aimed at both company car buyers and private customers. With 324,652 units built over the model's production run, the line was a major sales pillar for Triumph in the British mid-size saloon segment.
When buying a used Triumph 2000, the condition of the bodywork at the sills, wings and floor pan matters most, since British steel bodies of this era were highly prone to rust. On overdrive-equipped cars, a test drive should include engaging the extra gear, and on the fuel-injected 2.5PI the mechanical injection system deserves an expert check, as spare parts for it have become scarce.
Sources: SpecCodex-Register: Kennwerte des Modells Triumph 2000, 2.5PI & 2500
Technical data
Dimensions and weights
| Length | 162correct |
|---|---|
| Width | 62correct |
| Wheelbase | 96correct |
Origin and approval
| Assembly plants | United Kingdomcorrect |
|---|---|
| Body | 4-door salooncorrect |
| Vehicle class | Sports sedancorrect |
| Parent company | British Leylandcorrect |
Other data
| Predecessor | Triumph Toledo; Triumph 1300; Triumph 1500correct |
|---|---|
| Successor | Triumph Acclaimcorrect |
Frequently asked questions
When was the Triumph Dolomite built?
Production years: 1972–1980.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. What we cannot document is not here — we leave gaps open rather than estimate them.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.