Wacker Neuson EW100

Series: Wacker Neuson Mobile Excavator

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Wacker Neuson EW100 is a model in the Wacker Neuson Mobile Excavator series. The engine delivers 74.8 hp (55 kW), has 4 cylinders, with a displacement of 54,077.3 cm³. The engine comes from Perkins. The unladen weight is 11,036 kg. Ground clearance is 362.7 mm. The tank holds 170.3 litres. The pump delivers 180.2 l/min. Working pressure is 240 bar. The engine fitted is the 854E-E34TA. Tyre size: 8,25-20 14 PR Twin Tires. Rated output across the Wacker Neuson range ranges from 15.6 to 103.4 hp; the EW100 sits in the upper part of that range with 74.8 hp. Its immediate neighbours are the ET90 below it with 74.7 hp and the ET145 above it with 74.9 hp. 50 Wacker Neuson models across 9 series are on record. The model is listed under Excavators & compaction. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine makePerkinscorrect
Engine model854E-E34TAcorrect
Power74.8 hp (55 kW)correct
Cylinders4correct
Displacement54,077.3 cm³correct

Dimensions and weights

Width2,465.1correct
Ground clearance362.7correct
Unladen weight11,036 kgcorrect

Drivetrain and chassis

Tyre size8.25-20 14 PR Twin Tirescorrect

Working data

Pump flow180.2 l/mincorrect
Hydraulic pressure240 barcorrect
Fuel tank capacity170.3 lcorrect

Other data

Height502.9correct

Where this model stands

Power-to-weight ratio: 5 kW/t (55 kW / 11 t)

Stronger than 17% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Wacker Neuson EW100 have?

The Wacker Neuson EW100 delivers 74.8 hp.

How much does the Wacker Neuson EW100 weigh?

The unladen weight is 11,036 kg.

What engine does the Wacker Neuson EW100 have?

4 cylinders, 54,077 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare