Vw CRAFTER BE-COMBI 3500PLUS
Built: 2024 · Series: Crafter
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
VW Crafter – the collective page of Volkswagen's largest van: MAN's sister model since 2006, four- and five-cylinder diesels of 1,968 to 2,461 cm³ and 80 to 130 kW, lengths from 5,830 to 7,140 mm
The VW Crafter is Volkswagen's large van above the T range, built since 2006 in joint technical development with MAN as the sister model to the MAN TGE, originally at MAN's Steyr plant in Austria, and since the second generation in 2016 at Volkswagen's new plant in Września, Poland. Model names such as Crafter 35 give the roughly rounded weight class in steps of a hundred kilograms; the Crafter is offered as a panel van, flatbed, chassis for bodies and minibus.
Read on 3 more paragraphs
The register lists here 7 versions with 80 to 130 kW from four- and five-cylinder diesel engines of 1,968 to 2,461 cm³, unladen weights from 2,068 to 2,915 kg, gross weights from 3,025 to 3,500 kg, lengths from 5,830 to 7,140 mm and widths from 1,950 to 2,300 mm.
The Crafter serves the upper end of the van segment alongside the Mercedes Sprinter and Ford Transit and, thanks to numerous wheelbase, roof and weight variants, is the basis for many motorhome and special conversions as well as vans in courier and haulage use.
On a used Crafter, the condition of the turbocharger and particulate filter on the diesel engines, the dual-clutch or automatic transmission, rust on the sliding-door tracks and underbody on older vehicles, and wear on suspension and brakes from continuous commercial use count; parts run through Volkswagen's commercial-vehicle network, and for the first generation partly through MAN as well.
Sources: SpecCodex register, model data: Vw Crafter, Volkswagen Nutzfahrzeuge (manufacturer)
Technical data
Engine
| Cylinders | 4correct |
|---|---|
| Displacement | 1,968 cm³correct |
Dimensions and weights
| Length | 7,030 mmcorrect |
|---|---|
| Width | 2,070 mmcorrect |
| Wheelbase | 4,490 mmcorrect |
| Unladen weight | 2,486 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 151 km/hcorrect |
Frequently asked questions
How much does the Vw CRAFTER BE-COMBI 3500PLUS weigh?
The unladen weight is 2,486 kg.
What is the gross vehicle weight of the Vw CRAFTER BE-COMBI 3500PLUS?
3,500 kg.
What engine does the Vw CRAFTER BE-COMBI 3500PLUS have?
4 cylinders, 1,968 cm³ displacement.
What are the dimensions of the Vw CRAFTER BE-COMBI 3500PLUS?
7,030 mm × 2,070 mm.
When was the Vw CRAFTER BE-COMBI 3500PLUS built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Van in 3D section
Turn the model, look inside and click an assembly — each one is explained.
