Start › Motor graders › Volvo › G940B

Volvo G940B

Series: Volvo Motor Grader

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volvo G940B is a model in the Volvo Motor Grader series. The engine has 6 cylinders, with a displacement of 7,800.2 cm³. The unladen weight is 21,319 kg. The wheelbase measures 6,227.1 mm. Ground clearance is 609.6 mm. The tank holds 400.1 litres. The hydraulic tank holds 91.2 litres. Working pressure is 207 bar. The cooling system holds 31 litres. The electrical system runs on 24 V. The engine fitted is the D8HGBE4. Tyre size: 14:00 x 24. G-2. The Volvo Motor Grader series covers 34 models. Unladen weight within it ranges from 19,277.7 to 27,215.5 kg; the G940B sits in the lower part of that range with 21,319 kg. Its immediate neighbours are the G940 below it with 21,318.8 kg and the G946B above it with 21,772 kg. 5366 Volvo models across 29 series are on record. The model is listed under Motor graders. 15 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD8HGBE4correct
Cylinders6correct
Displacement7,800.2 cm³correct
AspirationTurbocharged, Aftercooledcorrect
Coolant capacity31 lcorrect

Dimensions and weights

Length9,150.1correct
Wheelbase6,227.1correct
Ground clearance609.6correct
Unladen weight21,319 kgcorrect

Drivetrain and chassis

Gearbox typeFully sequential, direct drive, Volvo powershift transmission transmissioncorrect
Tyre size14:00 x 24, G-2correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity91.2 lcorrect
Hydraulic pressure207correct
Fuel tank capacity400.1 lcorrect

Frequently asked questions

How much does the Volvo G940B weigh?

The unladen weight is 21,319 kg.

What engine does the Volvo G940B have?

6 cylinders, 7,800 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

G60

G66

G710

G710 VHP

G710B

G720

G720 VHP

G720B

G726 VHP

G726B

G730

G730 VHP

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare