Start › Motor graders › Volvo › G720

Volvo G720

Series: Volvo Motor Grader

The photo shows the G946B from the same series. Source: https://www.landwirt.com/detail/volvo-g946b-6x6-awd-epa-cert

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volvo G720 belongs to the Volvo Motor Grader series. The engine delivers 162.2 hp, has 6 cylinders, with a displacement of 8,270.6 cm³. The wheelbase measures 6,096 mm. Ground clearance is 609.6 mm. The tank holds 387.6 litres. The hydraulic tank holds 90.1 litres. Working pressure is 172.4 bar. The cooling system holds 47.3 litres. The electrical system runs on 24 V. The engine fitted is the 6C8,3. The Volvo Motor Grader series covers 34 models. Rated output within it ranges from 86.2 to 280.8 hp; the G720 sits in the lower part of that range with 162.2 hp. Its immediate neighbours are the G710 VHP below it with 141.9 hp and the G710B above it with 175.4 hp. 5366 Volvo models across 29 series are on record. The model is listed under Motor graders. 14 verified figures from 1 source are on file.

Technical data

Engine

Engine model6C8.3correct
Power162.2 hpcorrect
Cylinders6correct
Displacement8,270.6 cm³correct
Aspirationturbochargedcorrect
Coolant capacity47.3 lcorrect

Dimensions and weights

Length8,485.6correct
Wheelbase6,096correct
Ground clearance609.6correct

Drivetrain and chassis

Gearbox typeVolvo 8400correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity90.1 lcorrect
Hydraulic pressure172.4correct
Fuel tank capacity387.6 lcorrect

Frequently asked questions

How much power does the Volvo G720 have?

The Volvo G720 delivers 162 hp.

What engine does the Volvo G720 have?

6 cylinders, 8,271 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 14 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

G60

G66

G710

G710 VHP

G710B

G720 VHP

G720B

G726 VHP

G726B

G730

G730 VHP

G730B

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare