Start › Motor graders › Volvo › G720B

Volvo G720B

Series: Volvo Motor Grader

The photo shows the G80 from the same series. Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the G720B, Volvo offers a model from the Volvo Motor Grader series. The engine delivers 200.7 hp, with a displacement of 7,144.8 cm³. Rated speed is 2,200 rpm. The wheelbase measures 6,096 mm. Ground clearance is 640.1 mm. The tank holds 378.5 litres. Maximum torque is reached at 1,400 rpm. The hydraulic tank holds 134 litres. Working pressure is 186.2 bar. The cooling system holds 28 litres. The electrical system runs on 24 V. The engine fitted is the D7DGBE2. Tyre size: 14,00 x 24 . G-2. The Volvo Motor Grader series covers 34 models. Rated output within it ranges from 86.2 to 280.8 hp; the G720B sits in the middle of that range with 200.7 hp. Its immediate neighbours are the G726 VHP below it with 197.7 hp and the G930 above it with 206.8 hp. 5366 Volvo models across 29 series are on record. The model is listed under Motor graders. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD7DGBE2correct
Power200.7 hpcorrect
Rated speed2,200 rpmcorrect
Speed at max. torque1,400 rpmcorrect
Displacement7,144.8 cm³correct
Aspirationturbochargedcorrect
Coolant capacity28 lcorrect

Dimensions and weights

Length9,119.6correct
Wheelbase6,096correct
Ground clearance640.1correct

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Tyre size14.00 x 24, G-2correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity134 lcorrect
Hydraulic pressure186.2correct
Fuel tank capacity378.5 lcorrect

Frequently asked questions

How much power does the Volvo G720B have?

The Volvo G720B delivers 201 hp.

What engine does the Volvo G720B have?

7,145 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

G60

G66

G710

G710 VHP

G710B

G720

G720 VHP

G726 VHP

G726B

G730

G730 VHP

G730B

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare