Start › Motor graders › Volvo › G740 VHP

Volvo G740 VHP

Series: Volvo Motor Grader

The photo shows the G990 from the same series. Source: https://www.mascus.fr/travaux-publics/niveleuse/volvo-g990-4

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Volvo G740 VHP belongs to the Volvo Motor Grader series. The engine delivers 238.3 hp, with a displacement of 10,800.7 cm³. Rated speed is 2,100 rpm. The machine is 8,638 mm long. The wheelbase measures 6,248.4 mm. Ground clearance is 640.1 mm. The tank holds 378.5 litres. Maximum torque is reached at 1,300 rpm. The hydraulic tank holds 90.1 litres. Working pressure is 172.4 bar. The cooling system holds 50.3 litres. The electrical system runs on 24 V. The engine fitted is the M11. Tyre size: 14,00 x 24. G-2. The Volvo Motor Grader series covers 34 models. Rated output within it ranges from 86.2 to 280.8 hp; the G740 VHP sits in the upper part of that range with 238.3 hp. Its immediate neighbours are the G730B below it with 231.2 hp and the G960 above it with 245.4 hp. 5366 Volvo models across 29 series are on record. The model is listed under Motor graders. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelM11correct
Power238.3 hpcorrect
Rated speed2,100 rpmcorrect
Speed at max. torque1,300 rpmcorrect
Displacement10,800.7 cm³correct
Aspirationturbochargedcorrect
Coolant capacity50.3 lcorrect

Dimensions and weights

Length8,638correct
Wheelbase6,248.4correct
Ground clearance640.1correct

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Tyre size14.00 x 24, G-2correct
System voltage24 Vcorrect

Working data

Hydraulic oil capacity90.1 lcorrect
Hydraulic pressure172.4correct
Fuel tank capacity378.5 lcorrect

Frequently asked questions

How much power does the Volvo G740 VHP have?

The Volvo G740 VHP delivers 238 hp.

What engine does the Volvo G740 VHP have?

10,801 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

G60

G66

G710

G710 VHP

G710B

G720

G720 VHP

G720B

G726 VHP

G726B

G730

G730 VHP

Sources: [1]

Grader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare