Vogelzang 882SD
Built: 1983-1987 · Series: Trailers over 10 t (Class O4)
More machines from model year 1983
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Vogelzang trailers over 10 t (Class O4) – the Dutch tipper and bulk-material semi-trailer builder: 395 versions, gross weights up to 54 t
Class O4 groups, according to registration data from the Netherlands and Finland, all trailers with a permissible gross weight over 10 tonnes. Vogelzang is a Dutch maker building chiefly tipping and bulk-material semi-trailers for construction and agricultural haulage; the register data alone does not reliably establish the company's location or founding year. The register's type codes (including the V0 and V01-STG ranges) carry the abbreviations STG, SD and HF as suffixes distinguishing individual versions within the range, though the register does not spell out their meaning in detail.
Read on 3 more paragraphs
The register lists 395 versions with unladen weights of 2,240 to 38,330 kg and permissible gross weights of 10,600 to 54,000 kg. Lengths are recorded for 302 of the 395 models, ranging from 1,645 to 18,300 mm, and width for all 395 from 260 to 2,750 mm.
Tipping and bulk-material semi-trailers of this size are common in earth, gravel and recycling haulage, where Vogelzang competes with specialist tipper builders such as Meiller semi-trailers or Fliegl.
On used tipping semi-trailers, what counts especially is the condition of the tipping cylinder and hydraulic system, the tightness and wear of the body, the condition of the sideboards and tailgate, the axles (BPW/SAF) and EBS braking system, air suspension and frame corrosion at the heavily loaded tipping-axle points, and an unbroken inspection history.
Sources: SpecCodex register, model data: Vogelzang Anhänger über 10 t (Klasse O4)
Technical data
Dimensions and weights
| Length | 13,300 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,250 mmcorrect |
| Unladen weight | 10,620 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Vogelzang 882SD weigh?
The unladen weight is 10,620 kg.
What is the gross vehicle weight of the Vogelzang 882SD?
36,000 kg.
Up to what speed is the Vogelzang 882SD approved?
Approved up to 100 km/h.
What are the dimensions of the Vogelzang 882SD?
13,300 mm × 2,550 mm.
When was the Vogelzang 882SD built?
Production years: 1983-1987.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
