Vlastuin Truck & Trailer 3-VLAK
Built: 2015-2016 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Vlastuin – other models: the collective page of the Dutch tipping semi-trailers and trailers outside the named ranges, KIEP, VLAK and SEMI types, 22 to 50 tonnes gross weight
This page gathers the trailers and semi-trailers of the Dutch brand Vlastuin that the register could not assign to a named range. Vlastuin builds tipping semi-trailers and semi-trailer chassis for construction, agriculture and waste disposal. The type codes follow Dutch technical vocabulary: KIEP denotes a tipper, VLAK a platform or flat body, SEMI a semi-trailer and ANHW a drawbar trailer; the leading digit gives the axle count, so 3 KIEP is a three-axle tipping semi-trailer and 2-VLAK a two-axle platform semi-trailer. The AM and OB types denote further semi-trailer families of the brand.
Read on 3 more paragraphs
The register lists here 13 versions with unladen weights from 6,700 to 14,800 kg, gross weights from 22,000 to 50,000 kg, lengths from 9,700 to 13,600 mm and widths from 2,540 to 2,550 mm.
All versions therefore fall in the class of heavy semi-trailers over 10 tonnes, used in construction and recycling haulage and in agriculture for earth, bulk goods and silage. The width around 2.55 m matches the maximum permitted in Europe for semi-trailers, and the connection to the tractor unit runs through the kingpin.
On used tippers, the condition of the tipping body, hydraulic rams and side boards counts, on platform semi-trailers the load floor and lashing points, on all types axles, brakes, the overrun brake system and rust on the chassis as well as the kingpin housing; parts for axles and hydraulics usually run through cross-brand suppliers such as BPW or SAF.
Sources: SpecCodex register, model data: Vlastuin Truck & Trailer (weitere Modelle)
Technical data
Dimensions and weights
| Length | 12,800 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,500 mmcorrect |
| Unladen weight | 12,160 kgcorrect |
| Gross vehicle weight | 50,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Vlastuin Truck & Trailer 3-VLAK weigh?
The unladen weight is 12,160 kg.
What is the gross vehicle weight of the Vlastuin Truck & Trailer 3-VLAK?
50,000 kg.
Up to what speed is the Vlastuin Truck & Trailer 3-VLAK approved?
Approved up to 100 km/h.
What are the dimensions of the Vlastuin Truck & Trailer 3-VLAK?
12,800 mm × 2,550 mm.
When was the Vlastuin Truck & Trailer 3-VLAK built?
Production years: 2015-2016.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
