Vermeer 605M
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| PTO power required | 59.7 kWcorrect |
|---|
Dimensions and weights
| Length | 4,220 mmcorrect |
|---|---|
| Height | 2,950 mmcorrect |
| Unladen weight | 3,402 kgcorrect |
Working data
| Number of tines | 65correct |
|---|---|
| Twine rolls | 10correct |
| Number of knife bars | 10correct |
| Twine tying | electric center pivotcorrect |
| Number of belts | 8correct |
| Belt width | 177.8 mmcorrect |
| Max. bale weight | 1,089 kgcorrect |
Other data
| Hubart | hydraulic pickupcorrect |
|---|
Frequently asked questions
How much does the Vermeer 605M weigh?
The unladen weight is 3,402 kg.
What are the dimensions of the Vermeer 605M?
4,220 mm × 2,950 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Round baler in 3D section
Turn the model, look inside and click an assembly — each one is explained.