Vanaja VAK2/4800
Built: 1959-1959 · Series: Other models
More machines from model year 1959
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Vanaja – other truck models: the collective page of the Finnish manufacturer (1943–1968, Hämeenlinna, later absorbed into Sisu), six-cylinder engines from 92 to 220 kW, 9.6 to 17.85 t gross weight
Vanaja was a Finnish truck manufacturer based in Hämeenlinna that operated from 1943 to 1968 before being absorbed into the Sisu group. This collective page lists models the register could not assign to a named range; the type abbreviations follow Finnish registry logic, such as "VAK" for chassis series, "A" and "N" for different axle configurations, and the terms "Avolavakuorma-auto" (flatbed truck) and "Puoliperävaunun vetoauto" (semi-trailer tractor) from the Finnish vehicle register.
Read on 3 more paragraphs
The register lists 37 versions here with 92 to 220 kW, all with six-cylinder engines of 5,760 to 16,867 cm³ displacement. Gross vehicle weight runs from 9,600 to 17,850 kg, lengths from 6,750 to 9,650 mm, and widths from 2,330 to 2,500 mm.
As one of the few domestic truck makers in post-war Finland, Vanaja mainly supplied the home market with flatbed trucks and tractor units for timber haulage, construction and long-distance transport, before the brand was absorbed into Sisu as the Finnish commercial vehicle industry consolidated.
On these historic vehicles, buying used is mostly about the preservation state of the frame, cab and axles, since parts for the six-cylinder engines and chassis are now mainly sourced through collector and vintage-vehicle networks and through Sisu successor parts. Rust on the frame rails and leaf springs is the key check point for vehicles of this age.
Sources: Kennwerte der Modelle Vanaja (weitere Modelle), Traficom (Finnland)
Technical data
Engine
| Displacement | 7,700 cm³correct |
|---|
Dimensions and weights
| Length | 7,800 mmcorrect |
|---|---|
| Width | 2,420 mmcorrect |
| Unladen weight | 5,350 kgcorrect |
Frequently asked questions
How much does the Vanaja VAK2/4800 weigh?
The unladen weight is 5,350 kg.
What engine does the Vanaja VAK2/4800 have?
7,700 cm³ displacement.
What are the dimensions of the Vanaja VAK2/4800?
7,800 mm × 2,420 mm.
When was the Vanaja VAK2/4800 built?
Production years: 1959.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.