Valtra 3400C
Series: Compact
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valtra Compact 3100 C to 3500 C – the small range of the Finnish brand: Compact as range, the number as power step, C as identifier, Deutz three- and four-cylinders of up to 4.3 litres, 39 to 57 kW, 2.6 to 2.8 t
The Compact range was Valtra's entry class around the turn of the millennium – small tractors between 50 and 80 hp for part-time farms, municipalities and horse yards that the Finnish maker from Suolahti did not build itself but sourced as bought-in machines with air-cooled Deutz engines, as was usual for the class under 80 hp with many brands. The type logic: Compact marks the range, the number the power step – 3100 about 50 hp, 3300 about 60, 3400 about 70, 3500 about 78 hp – C the range identifier. The engines are Deutz three- and four-cylinders of the air-cooled 913 series (F3L 913 in the register) of up to 4.3 litres at 2,350 to 2,400 rpm, the transmissions synchromesh gearboxes with shuttle.
Read on 3 more paragraphs
The register lists 7 versions with 38.8 to 56.7 kW from three- and four-cylinders, torque from 172 to 178 Nm on the recorded models, lift capacities from 2,475 to 2,485 kg, unladen weights from 2,560 to 2,800 kg, lengths from 3,760 to 3,890 mm and a height of 2,340 mm.
The Compact remained a sideline in the Valtra programme, which begins at 75 hp with the A, N and T ranges; the range was replaced in the 2000s by the A range, which Valtra builds partly itself and partly in Brazil.
On used tractors, operating hours, the condition of the air-cooled Deutz engine (cooling blower, cylinder fins), clutch and shuttle, four-wheel-drive clutch, hydraulics and front loader count; parts run through Deutz for the engine and Valtra for the machine.
Sources: SpecCodex register, model data: Valtra Compact, Valtra (AGCO, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 72 hp (53 kW)correct |
| Rated speed | 2,350 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 4,314 cm³correct |
| Cooling | air-cooledcorrect |
Dimensions and weights
| Length | 3,770 mmcorrect |
|---|---|
| Height | 2,340 mmcorrect |
| Wheelbase | 2,225 mmcorrect |
| Unladen weight | 2,800 kgcorrect |
Drivetrain and chassis
| Gearbox | 24 + 24Rcorrect |
|---|---|
| Front tyres | 12.4R20correct |
| Rear tyres | 16.9R28correct |
| Top speed | 40 km/hcorrect |
Working data
| Lifting capacity | 2,485 kgcorrect |
|---|
Where this model stands
Power-to-weight ratio: 18.9 kW/t (53 kW / 2.8 t)
Power class: Universal (40–100 hp)
Stronger than 50% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valtra 3400C have?
The Valtra 3400C delivers 72 hp.
How much does the Valtra 3400C weigh?
The unladen weight is 2,800 kg.
What engine does the Valtra 3400C have?
4 cylinders, 4,314 cm³ displacement, Diesel.
How fast does the Valtra 3400C go?
Top speed is 40 km/h.
How much does the rear linkage of the Valtra 3400C lift?
The rear linkage lifts 2,485 kg.
What are the dimensions of the Valtra 3400C?
3,770 mm × 2,340 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 16 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.