Valtra A63 (P)lantage/(K)ompakt
Built: 2014 · Series: A (3. Serie)
More machines from model year 2014
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valtra A (3rd series): collective page of tractors A53, A63 and A73 in Plantage and Kompakt versions from Suolahti, three-cylinder 3,300 cm³ diesels, 37 to 58 kW
The third series of the Valtra A tractors is built at the Finnish plant in Suolahti and comprises the models A53, A63 and A73 in the register, each in the narrow Plantage version and the somewhat wider Kompakt version. Valtra is the name used since the 1990s for the Finnish tractor works, formerly operating under the Valmet brand, and has belonged to the US group AGCO since 2004. The 3rd-series designation distinguishes these models from earlier generations of the same A family.
Read on 3 more paragraphs
The register lists 3 versions with 37 to 58 kW from three-cylinder diesel engines of 3,300 cm³; depending on the Plantage or Kompakt version and cab fitment, unladen weights range from 2,700 to 3,200 kg, lengths from 4,000 to 4,100 mm, widths from 1,700 to 1,940 mm and heights from 2,175 to 2,580 mm; torque reaches 310 Nm.
The narrow Plantage version is designed for work in the tight row spacing of orchards and vineyards, while the Kompakt version serves as a more versatile farmyard tractor for small and medium holdings; both compete with comparable narrow-track and compact models from Same, Fendt and Kubota.
When buying used, on the Plantage version particularly the condition of the mudguards and cab after contact with branches matters, and on both versions the clutch, gearbox and hydraulics, plus the front axle bearings; spare parts run through the Valtra dealer network.
Sources: SpecCodex register, model data: Valtra A (3. Serie), Valtra
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 68 hp (50 kW)correct |
| Cylinders | 3correct |
| Displacement | 3,300 cm³correct |
Dimensions and weights
| Wheelbase | 2,030 mmcorrect |
|---|---|
| Ground clearance | (P) 320, (K) 380 mmcorrect |
| Unladen weight | 2,700 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12v/12rcorrect |
| Front tyres | (P) 280/70R16, (K) 300/70R20correct |
| Rear tyres | (P) 380/85R24(K) 380/85R30correct |
Where this model stands
Power-to-weight ratio: 18.5 kW/t (50 kW / 2.7 t)
Power class: Universal (40–100 hp)
Stronger than 47% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valtra A63 (P)lantage/(K)ompakt have?
The Valtra A63 (P)lantage/(K)ompakt delivers 68 hp.
How much does the Valtra A63 (P)lantage/(K)ompakt weigh?
The unladen weight is 2,700 kg.
What engine does the Valtra A63 (P)lantage/(K)ompakt have?
3 cylinders, 3,300 cm³ displacement, Diesel.
When was the Valtra A63 (P)lantage/(K)ompakt built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
