Valpadana 1220 HST
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valpadana – other models: the collective page of tractors outside the named ranges, from the 1220 HST through the 4RM and Synchro types to the 9585 Multitrac, 11.6 to 75 kW, Yanmar, Perkins and Lombardini engines
Valpadana is an Italian tractor manufacturer from the Po Valley; this collective page gathers its models outside the named ranges, from compact HST types to the larger utility tractors of the 6000 and 9000 series. The type designations mostly follow a four-digit power-class number, supplemented by codes for equipment and drive: HST denotes hydrostatic drive, 4RM the Italian quattro ruote motrici, i.e. four-wheel drive, DT doppia trazione, the Italian term for dual traction, and VRM and ISR further gearbox and equipment variants.
Read on 3 more paragraphs
The register lists here 38 versions with 11.6 to 75 kW (15.6 to 101 hp), powered by engines from Yanmar, Perkins, Lombardini, Deutz, Cummins and Slanzi, all diesel.
With this power range Valpadana serves the segment of small and mid-size tractors for orchards, vineyards and special crops as well as smaller farms, competing directly with other Italian makers such as Goldoni or Antonio Carraro.
Buying used, on the HST models check the condition of the hydrostatic pump and motors and for leaks in the hydraulic lines, on mechanical gearboxes the clutch and synchro rings; depending on the engine fitted – Yanmar, Lombardini or Perkins – parts sources and service intervals differ markedly. On the small machines, often used on the steep slopes of vineyards, also check the frame and steering knuckles for cracking and the tyres for uneven wear.
Sources: SpecCodex register, model data: Valpadana (weitere Modelle)
Technical data
Engine
| Engine make | Lombardinicorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 15.6 hp (11.6 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Italycorrect |
|---|
Frequently asked questions
How much power does the Valpadana 1220 HST have?
The Valpadana 1220 HST delivers 15.6 hp.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
