Valmet 8100
Built: 1990–1996 · Series: MEGA-Baureihe
More machines from model year 1990
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Valmet Mega range: collective page of Finnish tractors 8000 to 8200 from Suolahti, six-cylinder diesels up to 7,365 cm³, 72 to 96 kW (120 to 130 hp), 1990s
The Mega range from Valmet, dating from the 1990s and comprising the models 8000, 8100 and 8200, formed the top power segment of Finnish tractor production in Suolahti; the model numbers rank the three versions by power class. As the brand's top six-cylinder models, they stood clearly apart from Valmet's smaller three- and four-cylinder ranges and marked the upper end of the line-up at the time.
Read on 3 more paragraphs
The register lists 3 versions with 72.1 to 95.6 kW (120 to 130 hp) from six-cylinder diesel engines of 6,593 to 7,365 cm³, unladen weights of 4,560 to 4,700 kg, lengths of 4,740 to 4,745 mm, widths of 2,170 to 2,200 mm and heights of 2,720 to 2,760 mm; torque ranges from 366 to 490 Nm at a rated speed of 2,225 rpm.
As the brand's most powerful range, the Mega handled heavy field work on large Nordic farms, such as deep ploughing and driving large implements, competing with the top six-cylinder models from Volvo BM/Valtra, Case IH and John Deere.
When buying used, condition of the six-cylinder diesel including turbocharger and cooling, the gearbox and hydraulics under full load, and the lift and PTO all matter; spare parts are available through today's Valtra network and independent farm-machinery dealers. The electrical system on these older six-cylinder models is also worth a close look.
Sources: SpecCodex register, model data: Valmet Mega
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 120 hp (88.3 kW)correct |
| Rated speed | 2,225 rpmcorrect |
| Torque | 421 Nmcorrect |
| Speed at max. torque | 1,220 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 6,593 cm³correct |
| Bore | 108 mmcorrect |
| Stroke | 120 mmcorrect |
| Compression ratio | 16.5correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,745 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Height | 2,760 mmcorrect |
| Wheelbase | 2,558 mmcorrect |
| Ground clearance | 475 mmcorrect |
| Unladen weight | 4,600 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Gearbox | 12 V/12 R, 24 V/24 R and 36 V/36 Rcorrect |
| Front tyres | 14.9 R 24 AScorrect |
| Rear tyres | 18.4 R 34 AScorrect |
| Top speed | 30 km/hcorrect |
Working data
| Fuel tank capacity | 165 lcorrect |
|---|
Origin and approval
| Construction | unit construction (no separate frame)correct |
|---|
Other data
| Linkage category | Cat IIcorrect |
|---|---|
| PTO speed | 540/1000 rpmcorrect |
Where this model stands
Power-to-weight ratio: 19.2 kW/t (88 kW / 4.6 t)
Power class: Large (100–180 hp)
Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Valmet 8100 have?
The Valmet 8100 delivers 120 hp.
How much does the Valmet 8100 weigh?
The unladen weight is 4,600 kg.
What engine does the Valmet 8100 have?
6 cylinders, 6,593 cm³ displacement, Diesel.
How fast does the Valmet 8100 go?
Top speed is 30 km/h.
What are the dimensions of the Valmet 8100?
4,745 mm × 2,200 mm × 2,760 mm.
When was the Valmet 8100 built?
Production years: 1990–1996.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 28 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.