Start › Tractors › Valmet › 02 er-Baureihe › 802/802-4

Valmet 802/802-4

Built: 1980–1983 · Series: 02 er-Baureihe

More machines from model year 1980

The photo shows the 1502 from the same series. Source: https://commons.wikimedia.org/w/index.php?curid=44366635 up

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 02er series from Valmet includes the 802/802-4. Production: 1980–1983. The engine delivers 82 hp (60.3 kW), has 4 cylinders, with a displacement of 4,397 cm³. Torque is 306 Nm. Rated speed is 2,200 rpm. The machine is 3,840 mm long, 1,971 mm wide and 2,499 mm high. The unladen weight is 3,539 kg. The wheelbase measures 2,339 mm. Ground clearance is 480 mm. Top speed is 30 km/h. Transmission: 8 V/2 R. The engine is water-cooled. Tyres: front 10.00-16 ASF (A: 13.6-28 AS), rear 16.9-34 AS (A: 18.4-34 AS). The fuel is diesel. The bore measures 108 mm. The stroke is 120 mm. The compression ratio is 16:1. Maximum torque is reached at 1,450 rpm. Construction: frame construction. Rated output across the Valmet range ranges from 22 to 136 hp; the 802/802-4 sits in the middle of that range with 82 hp. Its immediate neighbours are the 800 below it with 80 hp and the 865-2/865 above it with 87 hp. Rated output across the Valmet range ranges from 16.2 to 100 kW; here the 802/802-4 sits in the middle of that range with 60.3 kW. 414 Valmet models across 21 series are on record.

The Valmet 02 range – Finnish tractors from Suolahti: the large 1502 and the 802/802-4, 60.3 to 100 kW, 3,539 to 7,470 kg

The 02 range is the older of the two Valmet generations covered here from Suolahti in Finland, and it spans an unusually wide arc: the smaller 802/802-4 and the large 1502, the flagship of the range with six cylinders and markedly higher output. As with the later 03 range, an appended -4 marks the four-wheel-drive version of the same base model.

Read on 3 more paragraphs

The register lists 2 versions with 60.3 to 100 kW from four to six cylinders of 4,397 to 6,596 cm³, torque of 306 to 550 Nm, unladen weights of 3,539 to 7,470 kg, lengths of 3,840 to 5,330 mm, widths of 1,971 to 2,125 mm, heights of 2,499 to 3,000 mm and rated speeds of 2,200 to 2,300 rpm.

In the 1970s and 1980s Valmet was among Scandinavia's leading tractor makers; with the 1502 the brand fielded one of the most powerful tractors in its line-up for large arable farms, while the 802 served as a versatile mid-range tractor for the broad mass of Finnish and Swedish farming.

On used examples, the condition of the injection pump and cooling system, the state of clutch, gearbox and PTO all count, and on the large 1502 especially wear on the axles and hydraulic pump under heavy drawbar load; spare parts run through today's Valtra service network and independent farm-machinery dealers, and on the 802-4 the driven front axle deserves particular attention.

Sources: SpecCodex register, model data: Valmet 02er-Baureihe

Technical data

Engine

Fuel	dieselcorrect
Power	82 hp (60.3 kW)correct
Rated speed	2,200 rpmcorrect
Torque	306 Nmcorrect
Speed at max. torque	1,450 rpmcorrect
Cylinders	4correct
Displacement	4,397 cm³correct
Bore	108 mmcorrect
Stroke	120 mmcorrect
Compression ratio	16correct
Cooling	water-cooledcorrect

Dimensions and weights

Length	3,840 mmcorrect
Width	1,971 mmcorrect
Height	2,499 mmcorrect
Wheelbase	2,339 mmcorrect
Ground clearance	480 mmcorrect
Unladen weight	3,539 kgcorrect

Drivetrain and chassis

Drive	rear- or four-wheel drivecorrect
Gearbox	8 V/2 Rcorrect
Front tyres	10.00-16 ASF (A: 13.6-28 AS)correct
Rear tyres	16.9-34 AS (A: 18.4-34 AS)correct
Top speed	30 km/hcorrect

Origin and approval

Construction	frame constructioncorrect

Where this model stands

Power-to-weight ratio: 17 kW/t (60 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 57% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet 802/802-4 have?

The Valmet 802/802-4 delivers 82 hp.

How much does the Valmet 802/802-4 weigh?

The unladen weight is 3,539 kg.

What engine does the Valmet 802/802-4 have?

4 cylinders, 4,397 cm³ displacement, Diesel.

How fast does the Valmet 802/802-4 go?

Top speed is 30 km/h.

What are the dimensions of the Valmet 802/802-4?

3,840 mm × 1,971 mm × 2,499 mm.

When was the Valmet 802/802-4 built?

Production years: 1980–1983.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
Shift the gearbox cold and warm — jumps only show up at temperature.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 24 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →