Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Urus › Bambi

Urus Bambi

Series: Typ C

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the Bambi, Urus offers a model from the Typ C series. The engine delivers 10 hp. The machine is 2,080 mm long, 1,500 mm wide and 1,400 mm high. The unladen weight is 600 kg. The wheelbase measures 1,250 mm. Ground clearance is 300 mm. Top speed is 14 km/h. Tyres: front 6-24 AS, rear 6-24 AS. Rated output across the Urus range ranges from 10 to 40 hp; the Bambi sits at the bottom of that range with 10 hp. Its immediate neighbours are the Allrad 15 PS above it with 15 hp. Unladen weight across the Urus range ranges from 600 to 1,920 kg; here the Bambi sits at the bottom of that range with 600 kg. 6 Urus models across 2 series are on record.

Bambi (Typ C series) by Urus: compact small tractor rated at 10 hp with 300 mm of ground clearance for uneven terrain work.

The Bambi belongs to the class of compact small tractors built for special use with high ground clearance, for example on uneven or undulating terrain where standard tractors with lower clearance run into limits and would easily ground out.

Read on 3 more paragraphs

The Bambi delivers 10 hp and offers 300 mm of ground clearance, at a height of 1,400 mm, a length of 2,080 mm and a width of 1,500 mm. At an unladen weight of 600 kg, a wheelbase of 1,250 mm and a top speed of 14 km/h, the machine is a very light, compact small tractor, whose short wheelbase also gives it a tight turning circle.

The raised ground clearance of 300 mm, combined with 6-24 AS tyres on both front and rear axles, points to use in row crops or on uneven, stony ground, where a lower-slung chassis could be damaged. Small tractors like this handle light pulling and grounds-care work rather than heavy soil cultivation, such as towing small trailers or driving simple mowers.

On a used Bambi, the condition of the steering knuckles and linkage matters, since the raised build height puts more leverage on the chassis on older machines. The tyres should also be checked for even wear and cracking in the rubber, along with the mounting points for the implements for excessive play, especially after long years of light-duty outdoor work in variable weather.

Sources: SpecCodex-Register: Kennwerte des Modells Bambi

Technical data

Engine

Power10 hpcorrect

Dimensions and weights

Length2,080 mmcorrect
Width1,500 mmcorrect
Height1,400 mmcorrect
Wheelbase1,250 mmcorrect
Ground clearance300 mmcorrect
Unladen weight600 kgcorrect

Drivetrain and chassis

Front tyres6-24 AScorrect
Rear tyres6-24 AScorrect
Top speed14 km/hcorrect

Where this model stands

Power-to-weight ratio: 12.3 kW/t (7 kW / 0.6 t)

Power class: Compact (< 40 hp)

Stronger than 1% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Urus Bambi have?

The Urus Bambi delivers 10 hp.

How much does the Urus Bambi weigh?

The unladen weight is 600 kg.

How fast does the Urus Bambi go?

Top speed is 14 km/h.

What are the dimensions of the Urus Bambi?

2,080 mm × 1,500 mm × 1,400 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare