Tracon Uden TO 1209
Built: 1999 · Series: TO
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tracon Uden TO – a wide range from light trailers to heavy low-loaders: 5 to 42 t gross weight, 1.7 to 34.58 t unladen weight, up to 14.70 m length, from Uden (Netherlands)
Tracon of Uden in the Dutch province of North Brabant runs a widely spread trailer range under the TO designation, from light trailers for building-site and landscaping work to heavy low-loaders for abnormal-load transport. The model names give two numerical values on most versions, which, depending on the size class, describe the load length, axle load or weight of that version; individual types also carry the letter S.
Read on 3 more paragraphs
The register lists here 19 versions with unladen weights from 1,700 to 34,580 kg, gross weights from 5,000 to 42,000 kg, lengths from 5,980 to 14,700 mm and widths from 2,100 to 2,550 mm.
This span from the light trailer class to the forty-tonne low-loader is typical of smaller and medium-sized trailer builders that, alongside standard trailers, also build special vehicles for local heavy-haulage and construction-machinery transport; such low-loaders round out the fleets of earthmoving and crane firms on the Dutch and Belgian markets.
On a used example, the load bed, axle and brakes count on the light versions, and on the heavy low-loaders additionally the condition of the ramps and hydraulics (tilt bed, lowering chassis), the steering axles and their bearings, tyres and rims for the relevant load rating, and the frame and welds for cracking after heavy-load service.
Sources: SpecCodex register, model data: Tracon Uden TO
Technical data
Dimensions and weights
| Length | 11,000 mmcorrect |
|---|---|
| Width | 2,520 mmcorrect |
| Wheelbase | 7,990 mmcorrect |
| Unladen weight | 6,340 kgcorrect |
| Gross vehicle weight | 20,240 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Tracon Uden TO 1209 weigh?
The unladen weight is 6,340 kg.
What is the gross vehicle weight of the Tracon Uden TO 1209?
20,240 kg.
Up to what speed is the Tracon Uden TO 1209 approved?
Approved up to 100 km/h.
What are the dimensions of the Tracon Uden TO 1209?
11,000 mm × 2,520 mm.
When was the Tracon Uden TO 1209 built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
T.O. 1.5-4
TO 1,5-5,4
TO 1.5 4
TO 1.5-3.5
TO 1.5-5
TO 1227
TO 15-4
TO S 1227
TO S 1230
TO S1210
TO S15 55
TO,5.5-8
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
