Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Tatra › Other models › T 815 S 3

Tatra T 815 S 3

Built: 1986 · Series: Other models

More machines from model year 1986

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Tatra T 815 S 3 is a vehicle built by Tatra. Production: 1986. The engine has 10 cylinders. The vehicle is 2,500 mm wide. The unladen weight is 11,560 kg. The wheelbase measures 4,870 mm. The gross vehicle weight is 25,500 kg. The vehicle runs on 6 wheels. Unladen weight across the Tatra range ranges from 2,980 to 38,400 kg; the T 815 S 3 sits in the lower part of that range with 11,560 kg. Its immediate neighbours are the TATRA 148 S 3 below it with 11,100 kg and the T 158 above it with 13,199 kg. Gross vehicle weight across the Tatra range ranges from 3,450 to 50,000 kg; here the T 815 S 3 sits in the middle of that range with 25,500 kg. 46 Tatra models across 6 series are on record.

Tatra – other models: the collective page of the Kopřivnice trucks outside the named ranges, from the T111 through the T148 to the T815, air-cooled six- to twelve-cylinders, 22,000 to 50,000 kg gross vehicle weight

This page gathers the Tatra trucks the register could not assign to a named range – from the post-war classic T111 through the T138 and T148 of the 1950s to 1970s to the T815, still built in variants today, and its successor generation Phoenix. Tatra of Kopřivnice has built its heavy trucks continuously on the same design principle since the T111 of 1942: a central backbone-tube frame with independent suspension on all axles, allowing high wheel articulation even off-road. The type number has always simply denoted the model in the works' development sequence, from the T111 to the T815; axle formulas such as 6X6 and 8X8 denote drive on all axles.

Read on 3 more paragraphs

The register lists here 24 versions with 22 to 390 kW from six to twelve cylinders of 11,762 to 17,640 cm³ displacement, unladen weights from 8,790 to 38,400 kg, gross vehicle weights from 22,000 to 50,000 kg, lengths from 7,340 to 13,680 mm and widths from 2,400 to 2,600 mm.

Tatra's backbone-tube trucks are regarded worldwide as the reference for off-road capability in military, mining and disaster-relief vehicles; the air-cooled V12 engines of the T815 family are a distinguishing feature of the brand against Western European makers, which rely throughout on liquid cooling.

Buying used, on Tatra trucks the condition of the backbone tube and swing arms, the tightness of the axle joints, on the air-cooled engines the cooling-air ducting and oil level, and rust on the cab and frame fittings all count; spare parts run through the Tatra works in Kopřivnice and Eastern European specialist dealers.

Sources: SpecCodex register, model data: Tatra (weitere Modelle), Tatra Trucks (manufacturer)

Technical data

Engine

Cylinders10correct

Dimensions and weights

Width2,500 mmcorrect
Wheelbase4,870 mmcorrect
Unladen weight11,560 kgcorrect
Gross vehicle weight25,500 kgcorrect

Drivetrain and chassis

Wheels6correct

Frequently asked questions

How much does the Tatra T 815 S 3 weigh?

The unladen weight is 11,560 kg.

What is the gross vehicle weight of the Tatra T 815 S 3?

25,500 kg.

What engine does the Tatra T 815 S 3 have?

10 cylinders.

When was the Tatra T 815 S 3 built?

Production years: 1986.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare