Tatra 810
Built: 2008-2008 · Series: Other models
The photo shows the TNT 815 VT 8 from the same series.
Source: https://www.tatra.cz/?lang=en
The 810 comes from Tatra. Production: 2008. Transmission: ZF 6 manual gearbox 6 speed + auxiliary gearbox Steyr VG750/270. 36 Tatra models across 4 series are on record. The model is listed under Trucks over 7.5 t. 2 verified figures from 2 sources are on file.
Technical data
Engine
| Engine | Diesel * Renault DXi7 240 EC01 (Euro 3) * Renault Dxi 7 (Euro 5)correct |
|---|
Drivetrain and chassis
| Gearbox | ZF 6 manual gearbox 6 speed + auxiliary gearbox Steyr VG750/270correct |
|---|
Frequently asked questions
When was the Tatra 810 built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 2 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.