Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › TAFE › Other models › 6020 M

TAFE 6020 M

Series: Other models

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 6020 M comes from TAFE. The engine delivers 19 hp (14 kW), has 3 cylinders, with a displacement of 953 cm³. Rated speed is 2,400 rpm. The machine is 2,895 mm long, 1,100 mm wide and 2,310 mm high. The unladen weight is 990 kg. The wheelbase measures 1,490 mm. Ground clearance is 260 mm. Top speed is 25 km/h. Lifting capacity is 739 kg. Transmission: 9v + 3r. The engine is water-cooled. Tyres: front 180/85D12, rear 8.3 - 20. The fuel is diesel. Rated output across the TAFE range ranges from 19 to 100 hp; the 6020 M sits at the bottom of that range with 19 hp. Its immediate neighbours are the 25 DI above it with 25 hp. 35 TAFE models are on record.

TAFE – other models: the collective page of tractors outside the named ranges, DI types from the 25 DI to the 9040, 14 to 127 kW, mostly TAFE's own Simpson diesel engines

TAFE (Tractors and Farm Equipment Limited) is an Indian tractor manufacturer based in Chennai with a long-standing licensing and shareholding partnership with Massey Ferguson for the Indian market; this collective page gathers the TAFE models outside the named ranges. The DI suffix in type designations such as 25 DI, 35 DI or 45 DI stands for Direct Injection, a key selling point over older pre-chamber engines in the Indian market.

Read on 3 more paragraphs

The register lists here 35 versions with 14 to 127 kW (19 to 100 hp) from three- and four-cylinder engines, powered mostly by units from TAFE's sister company Simpson as well as Mitsubishi and Perkins engines.

With this wide power range TAFE covers everything from the small row-crop tractor to the mid-range field tractor, serving the core of Indian agriculture, where the brand ranks among the largest manufacturers alongside Mahindra and Escorts and increasingly exports to Africa, South-East Asia and other emerging markets.

Buying used, on the Simpson engines check the condition of the injection pump and cylinder head, on all types the clutch, brakes and hydraulic lift, since these tractors are often used intensively in dusty and variably humid conditions; parts supply through the TAFE and Simpson networks is very good in India, but noticeably more limited outside the subcontinent.

Sources: SpecCodex register, model data: TAFE (weitere Modelle), TAFE (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power19 hp (14 kW)correct
Rated speed2,400 rpmcorrect
Cylinders3correct
Displacement953 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length2,895 mmcorrect
Width1,100 mm (minimum)correct
Height2,310 mmcorrect
Wheelbase1,490 mmcorrect
Ground clearance260 mmcorrect
Unladen weight990 kgcorrect

Drivetrain and chassis

Gearbox9v + 3rcorrect
Front tyres180/85D12correct
Rear tyres8.3 - 20correct
Top speed25 km/hcorrect

Working data

Lifting capacity739 kgcorrect

Where this model stands

Power-to-weight ratio: 14.1 kW/t (14 kW / 1 t)

Power class: Compact (< 40 hp)

Stronger than 6% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the TAFE 6020 M have?

The TAFE 6020 M delivers 19 hp.

How much does the TAFE 6020 M weigh?

The unladen weight is 990 kg.

What engine does the TAFE 6020 M have?

3 cylinders, 953 cm³ displacement, Diesel.

How fast does the TAFE 6020 M go?

Top speed is 25 km/h.

How much does the rear linkage of the TAFE 6020 M lift?

The rear linkage lifts 739 kg.

What are the dimensions of the TAFE 6020 M?

2,895 mm × 1,100 mm × 2,310 mm.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 20 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3] [4]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare