StartTractorsTAFE › 35 DI

TAFE 35 DI

Series: Other models

The photo shows the 6020 M from the same series. Source: https://tafe.cz/modelle/6020/

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The TAFE 35 DI is a tractor made by TAFE. It is powered by a three-cylinder engine producing 22 kW.

It runs on diesel; the engine is water-cooled. Within the range, rated power spans from 14 to 127 kW; with 22 kW, the 35 DI sits in the lower third. Directly alongside are the 2800 CE Hail America Series with 21 kW below and the 30 DI with 23 kW above.

Technical data

Engine

Engine makeSimpsoncorrect
Engine modelS324correct
Fueldieselcorrect
Power30 hp (22 kW)correct
Cylinders3correct
Bore88.9 mmcorrect
Stroke127 mmcorrect
Coolingwater-cooledcorrect

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Working data

Fuel tank capacity12.7 Galcorrect

Origin and approval

PlantIndiacorrect

Other data

Linkage categoryCAT IIcorrect

Frequently asked questions

How much power does the TAFE 35 DI have?

The TAFE 35 DI delivers 30 hp.

What engine does the TAFE 35 DI have?

3 cylinders, Diesel.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 15 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare