Technical register for agricultural, construction and commercial machinery · sourced data
Start › Mobile & rough terrain cranes › Tadano › AC › AC 5.130-1

Tadano AC 5.130-1

Built: 2022 · Series: AC

More machines from model year 2022

Source: tadano.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Tadano AC 5.130-1 belongs to the AC series. Production: 2022. The engine delivers 405 kW, has 6 cylinders, with a displacement of 12,700 cm³. The machine is 14,450 mm long and 2,740 mm wide. The unladen weight is 59,600 kg. The gross vehicle weight is 69,100 kg. The AC series covers 22 models. Rated output within it ranges from 260 to 460 kW; the AC 5.130-1 sits in the upper part of that range with 405 kW. Its immediate neighbours are the AC 4.080-1 below it with 340 kW and the AC 7.450-1 above it with 460 kW. Unladen weight within it ranges from 33,800 to 83,675 kg; here the AC 5.130-1 sits in the middle of that range with 59,600 kg. 108 Tadano models across 7 series are on record.

Tadano AC – all-terrain cranes on a dedicated carrier: from the AC 3.045-1 City to the AC 7.450-1, 260 to 460 kW, six-cylinder engines, 3- to 7-axle carriers from 22 to 84 tonnes

The AC designation stands for Tadano's all-terrain cranes, built on their own road-legal carrier. They are produced at the former Faun plant in Lauf an der Pegnitz, which the Japanese crane maker Tadano took over in the 1990s and initially ran as Tadano Faun before the brand was unified to Tadano. The type logic is consistent throughout: the digit before the point gives the axle count, the number after it the maximum lifting capacity in tonnes – the AC 3.045-1 is a three-axle crane rated at 45 tonnes, the AC 7.450-1 a seven-axle crane rated at 450 tonnes. The suffix "City" marks compact urban cranes with a short wheelbase for tight site access, and "-1" the design generation.

Read on 3 more paragraphs

The register lists 14 versions with 260 to 460 kW from six-cylinder engines of 5,883 to 15,259 cm³, gross weights from 22,000 to 84,000 kg, lengths from 8,470 to 18,100 mm and widths from 2,400 to 3,000 mm.

All-terrain cranes such as the AC range bridge the gap between pure construction-site cranes and road cranes: they drive to the site on their own axles and then work off-road without additional rigging or escort vehicles. Alongside Liebherr and the Manitowoc group's brands, Tadano is one of the major suppliers in this class, with the AC 7.450 in the upper capacity league used for industrial assembly and wind turbine erection.

When buying used, carrier and superstructure operating hours should be checked separately, along with the condition of the telescopic boom, hydraulic cylinders and outriggers, the validity of the crane inspection under the applicable regulations, and the tyres and brakes of the multi-axle carrier; parts and inspection records run through the Tadano service network.

Sources: SpecCodex register, model data: Tadano AC, Tadano (manufacturer)

Technical data

Engine

Power405 kWcorrect
Cylinders6correct
Displacement12,700 cm³correct

Dimensions and weights

Length14,450 mmcorrect
Width2,740 mmcorrect
Unladen weight59,600 kgcorrect
Gross vehicle weight69,100 kgcorrect

Where this model stands

Power-to-weight ratio: 6.8 kW/t (405 kW / 59.6 t)

Stronger than 91% of the mobile & rough terrain cranes in the register — out of 723 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Tadano AC 5.130-1 have?

The Tadano AC 5.130-1 delivers 405 kW.

How much does the Tadano AC 5.130-1 weigh?

The unladen weight is 59,600 kg.

What is the gross vehicle weight of the Tadano AC 5.130-1?

69,100 kg.

What engine does the Tadano AC 5.130-1 have?

6 cylinders, 12,700 cm³ displacement.

What are the dimensions of the Tadano AC 5.130-1?

14,450 mm × 2,740 mm.

When was the Tadano AC 5.130-1 built?

Production years: 2022.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Mobile crane in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare