Suzue M1101
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
The Suzue M1101 is a small tractor from Japan. Suzue was a Japanese brand of compact tractors that was later taken over by Mitsubishi; the machines are closely related to Mitsubishi models, which also shows in the engine.
The M1101 is powered by a water-cooled diesel engine, a two-cylinder unit from Mitsubishi. The drive is a selectable four-wheel drive, so the front axle can be engaged when needed, for example on wet or soft ground. The operator sits at an open station without a cab, and the steering is manual. The model was built in Japan. The M1101 thus stands for the design of compact Japanese tractors: simple technology, a small two-cylinder engine and a four-wheel drive that is engaged only when needed. Small tractors like this were built in Japan to work small fields and plots with little effort.
Suzue – other models: the collective page of Japanese compact tractors outside the named ranges, M1101 to M2001, 11 to 18 kW
This page gathers the Suzue tractors the register could not assign to a named range. Suzue is a Japanese maker of small compact tractors that, like other Japanese suppliers of the 1970s and 1980s – Kubota, Yanmar, Iseki, Satoh – belonged to the wave of compact tractors exported to North America and Europe at the time. The type logic ranges from simple model numbers such as 150 and 170 to the M range (M1101 to M2001), whose digits roughly reflect the build size.
Read on 4 more paragraphs
The register lists here 8 versions with 11 to 18 kW (15 to 24 hp), all with diesel engines.
Suzue tractors are among the small compacts that opened up the Western market for hobby, orchard and small holdings before the big Japanese brands with wide dealer networks became established there; the M range was aimed mainly at the domestic Japanese market and export to warmer growing regions.
On these smallest tractors, engine condition and the cooling system, clutch and transmission, and hydraulic tightness matter, as well as rust on bodywork; spares are scarce due to the brand's limited spread and usually only available through dealers specialising in Japanese compact tractors.
At 12 to 13 kW, these Suzue models sit at the very bottom of tractor output altogether, so the three-point linkage usually falls into the smallest ISO 730 Category 0, designed for very light implements. The PTO runs at the 540 rpm rated speed standard even for these smallest tractors.
Sources: SpecCodex register, model data: Suzue (weitere Modelle)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | selectable four-wheel drivecorrect |
|---|
Origin and approval
| Plant | Japancorrect |
|---|
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Tractor & Construction Plant Wiki (retrieved August 2026) · tractordata.com (retrieved October 2026) · How we check the data
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.
