Steyr 6250 Terrus
Built: 2018 · Series: Terrus
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
6250 Terrus (Terrus series) by Steyr: six-cylinder diesel engine rated at 184 kW (250 hp) at 2,200 rpm, in production since 2018.
The Terrus series is Steyr's class of large standard tractors with a fixed rear axle, a segment clearly separate from the articulated system tractors of the same group. Since 2018, the 6250 Terrus has been one of the most powerful models in this line.
Read on 3 more paragraphs
The 6250 Terrus is powered by a six-cylinder diesel engine of 6,700 cm³ displacement, delivering 184 kW (250 hp) at 2,200 rpm. At an unladen weight of 10,500 kg, a wheelbase of 2,995 mm and a top speed of 50 km/h, the machine combines strong pulling power with brisk road transport between field and farmyard, at a ratio of roughly 57 kg of weight per kW.
Large standard tractors of this power class pull wide cultivation and seeding equipment on the three-point linkage to ISO 730 and drive heavy trailers and harvesting machinery through the 540 or 1,000 rpm power take-off. The 50 km/h top speed allows brisk road travel between more distant fields, which shortens transfer times on larger farms with scattered plots.
On a used 6250 Terrus, it is worth looking at the exhaust after-treatment system, since modern six-cylinder diesels of this power class carry complex systems to meet emissions rules, as well as the condition of the tyres and axle bearings given the machine's high overall weight. The service history of the injection system and engine electronics matters just as much as the state of the mechanics on machinery this complex.
Sources: SpecCodex-Register: Kennwerte des Modells 6250 Terrus
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 250 hp (184 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Cylinders | 6correct |
| Displacement | 6,700 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 5,700 mm (to towing hitch)correct |
|---|---|
| Width | 2,536 mm (minimum)correct |
| Height | 3,265 mmcorrect |
| Wheelbase | 2,995 mmcorrect |
| Unladen weight | 10,500 kgcorrect |
Drivetrain and chassis
| Gearbox | continuously variable continuously variable transmissioncorrect |
|---|---|
| Top speed | 50 km/hcorrect |
Where this model stands
Power-to-weight ratio: 17.5 kW/t (184 kW / 10.5 t)
Power class: Heavy (> 180 hp)
Stronger than 95% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Steyr 6250 Terrus have?
The Steyr 6250 Terrus delivers 250 hp.
How much does the Steyr 6250 Terrus weigh?
The unladen weight is 10,500 kg.
What engine does the Steyr 6250 Terrus have?
6 cylinders, 6,700 cm³ displacement, Diesel.
How fast does the Steyr 6250 Terrus go?
Top speed is 50 km/h.
What are the dimensions of the Steyr 6250 Terrus?
5,700 mm × 2,536 mm × 3,265 mm.
When was the Steyr 6250 Terrus built?
Production years: 2018.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Shift the gearbox cold and warm — jumps only show up at temperature.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 17 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.