Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Steyr (SLT) › 9086 (a)

Steyr (SLT) 9086 (a)

Built: 1993–1995 · Series: 9000er-Baureihe

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the 9086 (a), Steyr (SLT) offers a model from the 9000er series. Production: 1993–1995. The engine delivers 86 hp (63.3 kW), has 4 cylinders, with a displacement of 4,156 cm³. Rated speed is 2,300 rpm. The machine is 4,025 mm long, 2,063 mm wide and 2,660 mm high. The unladen weight is 3,530 kg. The wheelbase measures 2,420 mm. Top speed is 30 km/h. Transmission: 16V/8R, 16V/16R and 32V/16R. The engine is water-cooled. Tyres: front 11.00-16 ASF (A: 14.9 R 24 AS), rear 18.4.34 AS. The fuel is Diesel/RME. The bore measures 105 mm. The stroke is 120 mm. Construction: unit construction (no separate frame). The 9000er-Baureihe series covers 3 models. Rated output within it ranges from 78 to 94 hp; the 9086 (a) sits in the middle of that range with 86 hp. Its immediate neighbours are the 9078 (a) below it with 78 hp and the 9094 a above it with 94 hp. Unladen weight within it ranges from 3,370 to 3,920 kg; here the 9086 (a) sits in the lower part of that range with 3,530 kg. 228 Steyr (SLT) models across 6 series are on record.

Steyr 9000 range: collective page of tractors 9078, 9086 and 9094 from the 1990s, four-cylinder 4,156 cm³ diesels, 57 to 69 kW, RME-approved

The 9000 range from Steyr, dating from the 1990s, comprises three versions in the register – the 9078, 9086 and 9094 – whose model numbers denote rising power class. Like the rest of the Steyr line-up, these tractors were built at the Austrian plant in St. Valentin. At the time, the range belonged to the mid power segment of the Steyr model line-up, positioned between the smaller and larger series on offer.

Read on 3 more paragraphs

The register lists 3 versions with 57.4 to 69.2 kW from four-cylinder diesel engines of 4,156 cm³, unladen weights of 3,370 to 3,920 kg, lengths of 4,025 to 4,195 mm, widths of 1,873 to 2,063 mm and heights of 2,660 to 2,730 mm, at rated speeds of 2,250 to 2,300 rpm; the engines are approved for both diesel and RME (rapeseed methyl ester).

Tractors in this power class covered classic field work on medium-sized farms in the 1990s and competed with comparable ranges from Fiat, Deutz-Fahr and Massey Ferguson; RME approval already allowed running on the rapeseed-based biodiesel that Austria promoted early on. That early flexibility over fuel made the range attractive to farms already experimenting with home-grown biodiesel.

When buying used, condition of the four-cylinder diesel including injection and cooling — with earlier RME use, particularly the fuel-system seals — plus the gearbox, hydraulics and lift for wear all matter; spare parts run through the Steyr dealer network.

Sources: SpecCodex register, model data: Steyr 9000er, Steyr

Technical data

Engine

FuelDiesel/RMEcorrect
Power86 hp (63.3 kW)correct
Rated speed2,300 rpmcorrect
Cylinders4correct
Displacement4,156 cm³correct
Bore105 mmcorrect
Stroke120 mmcorrect
Coolingwater-cooledcorrect

Dimensions and weights

Length4,025 mmcorrect
Width2,063 mmcorrect
Height2,660 mmcorrect
Wheelbase2,420 mmcorrect
Ground clearance(A: 440) mmcorrect
Unladen weight3,530 kgcorrect

Drivetrain and chassis

Driverear- or four-wheel drivecorrect
Gearbox16V/8R, 16V/16R and 32V/16Rcorrect
Front tyres11.00-16 ASF (A: 14.9 R 24 AS)correct
Rear tyres18.4.34 AScorrect
Top speed30 km/hcorrect

Origin and approval

Constructionunit construction (no separate frame)correct

Where this model stands

Power-to-weight ratio: 17.9 kW/t (63 kW / 3.5 t)

Power class: Universal (40–100 hp)

Stronger than 59% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Steyr (SLT) 9086 (a) have?

The Steyr (SLT) 9086 (a) delivers 86 hp.

How much does the Steyr (SLT) 9086 (a) weigh?

The unladen weight is 3,530 kg.

What engine does the Steyr (SLT) 9086 (a) have?

4 cylinders, 4,156 cm³ displacement, Diesel/RME.

How fast does the Steyr (SLT) 9086 (a) go?

Top speed is 30 km/h.

What are the dimensions of the Steyr (SLT) 9086 (a)?

4,025 mm × 2,063 mm × 2,660 mm.

When was the Steyr (SLT) 9086 (a) built?

Production years: 1993–1995.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare