Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Steyr (SLT) › Other models › 15S18/P49/4X2

Steyr (SLT) 15S18/P49/4X2

Built: 1992 · Series: Other models

More machines from model year 1992

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 15S18/P49/4X2 comes from Steyr (SLT). Production: 1992. The engine has 6 cylinders, with a displacement of 6,595 cm³. The vehicle is 4,710 mm long and 2,550 mm wide. The unladen weight is 6,170 kg. The wheelbase measures 4,300 mm. The gross vehicle weight is 11,990 kg. The vehicle runs on 4 wheels. Unladen weight across the Steyr (SLT) range ranges from 1,770 to 16,870 kg; the 15S18/P49/4X2 sits in the lower part of that range with 6,170 kg. Its immediate neighbours are the 10S18/L37 4X4 SINGLE below it with 6,149 kg and the 9S14/033/4X2 above it with 6,240 kg. Gross vehicle weight across the Steyr (SLT) range ranges from 1,800 to 35,000 kg; here the 15S18/P49/4X2 sits in the lower part of that range with 11,990 kg. 228 Steyr (SLT) models across 6 series are on record.

Steyr – other models: the collective page of Austrian trucks outside the named ranges, from 4X2 tractor units to 8X4 tippers, with S, K and L type codes for drive and body variant, 110 to 191 kW

This page gathers the Steyr trucks the register could not assign to a named range – from light tractor units to heavy all-wheel-drive tippers. Steyr, which emerged from the Steyr-Werke in Steyr, Upper Austria, had built commercial vehicles since the 1920s and became Steyr-Daimler-Puch after the 1934 merger with Austro-Daimler and Puch; the truck division was known above all for off-road all-wheel-drive vehicles. The type codes in the register follow a fixed pattern: the leading number gives roughly the tonnage or power class, the letter the body type – S for tractor units, K for tippers, M and L for other body variants – followed by the axle formula (4X2, 4X4, 6X4, 6X6, 8X4); suffixes such as AKK or P denote chassis or drivetrain details. In 1990 MAN took a majority stake in the truck division, and since 2001 the Steyr plant has belonged entirely to MAN, today building components and cabs for the MAN truck range.

Read on 3 more paragraphs

The register lists here 57 versions from four- to eight-cylinders of 5,320 to 11,964 cm³, unladen weights from 4,040 to 16,870 kg, gross weights from 4,870 to 35,000 kg, lengths from 4,710 to 9,870 mm and widths from 2,200 to 2,570 mm.

Steyr trucks were in demand in Austria, Eastern Europe and the Middle East above all for their off-road ability, from forestry through construction firms to the military; the all-wheel-drive models in 6X6 and 8X4 formula competed directly with MAN, ÖAF and Tatra.

On used trucks, frame and transfer case, condition of the four-wheel-drive hubs and differential locks, brakes and axles count, and on tippers the tipper-body hydraulics; parts today run mostly through the MAN network, only to a limited extent for older model years.

Sources: SpecCodex register, model data: Steyr (weitere Modelle), MAN Truck & Bus (Rechtsnachfolger von Steyr)

Technical data

Engine

Cylinders6correct
Displacement6,595 cm³correct

Dimensions and weights

Length4,710 mmcorrect
Width2,550 mmcorrect
Wheelbase4,300 mmcorrect
Unladen weight6,170 kgcorrect
Gross vehicle weight11,990 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Steyr (SLT) 15S18/P49/4X2 weigh?

The unladen weight is 6,170 kg.

What is the gross vehicle weight of the Steyr (SLT) 15S18/P49/4X2?

11,990 kg.

What engine does the Steyr (SLT) 15S18/P49/4X2 have?

6 cylinders, 6,595 cm³ displacement.

What are the dimensions of the Steyr (SLT) 15S18/P49/4X2?

4,710 mm × 2,550 mm.

When was the Steyr (SLT) 15S18/P49/4X2 built?

Production years: 1992.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare