Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Steyr D Puch › Other models › STEYR 680 MF

Steyr D Puch 680 MF

Built: 1985 · Series: Other models

More machines from model year 1985

Source: landwirt.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The STEYR 680 MF comes from Steyr D Puch. Production: 1985. The engine has 6 cylinders, with a displacement of 5,975 cm³. The vehicle is 6,850 mm long and 2,400 mm wide. The unladen weight is 5,570 kg. The wheelbase measures 3,700 mm. The gross vehicle weight is 10,500 kg. The vehicle runs on 4 wheels. Unladen weight across the Steyr D Puch range ranges from 1,840 to 11,920 kg; the STEYR 680 MF sits in the lower part of that range with 5,570 kg. Its immediate neighbours are the F586GK below it with 4,830 kg and the 12M18 above it with 5,815 kg. Gross vehicle weight across the Steyr D Puch range ranges from 2,800 to 14,600 kg; here the STEYR 680 MF sits in the upper part of that range with 10,500 kg. 18 Steyr D Puch models across 2 series are on record.

Steyr-Daimler-Puch – other models: the collective page of the Austrian trucks and all-wheel-drive vehicles outside the named ranges, Pinzgauer 712M and Steyr 680, 2.5- to 9.7-litre engines from Graz

This page gathers the Steyr-Daimler-Puch vehicles the register could not assign to a named range. The group was formed in 1934 from the merger of Steyr-Werke with Austro-Daimler and Puch, with plants in Graz and Vienna; alongside trucks it built the off-road Pinzgauer, here in the six-wheel 712M version, and medium trucks of the Steyr 680 range. After several restructurings, the commercial-vehicle division, as Steyr Nutzfahrzeuge, became part of the MAN group in the 2000s. Suffixes such as 4X4 in the type codes denote the all-wheel drive fitted as standard on nearly all the vehicles listed here.

Read on 3 more paragraphs

The register lists here 11 versions with displacements from 2,499 to 9,726 cm³, four to six cylinders, unladen weights from 2,430 to 11,920 kg, gross weights from 3,500 to 14,600 kg, lengths from 4,960 to 9,510 mm and widths from 1,800 to 2,530 mm.

Steyr trucks and the Pinzgauer served the Austrian armed forces and NATO-aligned militaries as well as civilian users in alpine terrain, where the full-time all-wheel drive was decisive. Until consolidation into the MAN group, the marque was a fixture of Central European commercial-vehicle production.

On a used Pinzgauer, check the condition of the portal axles and transfer case, rust generally on the chassis and load bed, engine originality, and on the older drum-braked trucks a thorough overhaul of the brake system; parts now run through MAN and specialist dealers in military and off-road vehicles.

Sources: SpecCodex register, model data: Steyr-Daimler-Puch (weitere Modelle)

Technical data

Engine

Cylinders6correct
Displacement5,975 cm³correct

Dimensions and weights

Length6,850 mmcorrect
Width2,400 mmcorrect
Wheelbase3,700 mmcorrect
Unladen weight5,570 kgcorrect
Gross vehicle weight10,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Steyr D Puch 680 MF weigh?

The unladen weight is 5,570 kg.

What is the gross vehicle weight of the Steyr D Puch 680 MF?

10,500 kg.

What engine does the Steyr D Puch 680 MF have?

6 cylinders, 5,975 cm³ displacement.

What are the dimensions of the Steyr D Puch 680 MF?

6,850 mm × 2,400 mm.

When was the Steyr D Puch 680 MF built?

Production years: 1985.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare